Electronics Forum | Thu May 04 04:29:05 EDT 2023 | abhishek10
we have observed a Field claim in ECU where root cause is Lead lift found in one of the IC. What could be the possible reason for lead lift and how to avoid the same in future. QFP is the Type 1.Checked the Part Library(3-D Check Refernece no.-23
Electronics Forum | Thu May 04 13:42:47 EDT 2023 | wippsen
there is no reason to completely clean a circuit board. If you don't use a professional cleaning machine, you will always have leftover paste. Use a test board until the paste print is ok. You can wipe this off several times until the paste print is
Electronics Forum | Thu May 04 19:43:49 EDT 2023 | auriga2001
The idea is you test printing cycles with one board before thoroughly cleaning it. The board doesn't get thrown away. You just test print and wipe one board until you get a good print, then thoroughly clean that board. What would you use to clean a p
Electronics Forum | Fri May 05 15:38:39 EDT 2023 | proceng1
I am not familiar with that machine, but with most of my machines, there is a transformer with several different taps. You just move a couple wires around. Though two of my machines, one of which is a JUKI, required an external transformer.
Electronics Forum | Fri May 05 15:41:54 EDT 2023 | proceng1
At the beginning, we absolutely do this with the first board. However, we do have some problem child jobs where we end up wiping 1 in 5 prints. When searching the topic, most of what I got was "ultra-sonic" cleaners, but that isn't recommended for
Electronics Forum | Fri May 05 03:38:02 EDT 2023 | ttheis
I am looking for some parts to repair a dyna-pace 1 meter conveyor if anyone has a scrap unit laying around. We just need the sheet metal edge strip as shown in the attached photo. Also looking for width adjust handles and a source for the 10mm wide
Electronics Forum | Fri May 05 21:10:41 EDT 2023 | zsoden
Hi ELC, I'm curious about your comment of calibrating the Z axis. Our UP2000 has been moved around a few times and we've never done this nor noticed a need to. Could you please share some more information and even perhaps the calibration procedure?
Electronics Forum | Mon May 15 11:41:00 EDT 2023 | tommy_magyar
I used a different machine in the past (Essemtec - FLX) where the program loading window was very similar to the one you uploaded. What worked for me, is clicking on one of the files in the window, and start typing the program you are searching for.
Electronics Forum | Mon May 15 16:37:45 EDT 2023 | daniel_stanphill
We are interested in upgrading our Mydata/Mycronic jet printer. We have an older my500. We also have a screen printer but are only interested in another jet printer. Does anyone know of any comparable machines to the My700? I have also researched Ess
Electronics Forum | Wed May 17 09:01:43 EDT 2023 | dimamalin
Thank you all for your participation in solving the problem. Unfortunately, we do not have the option to work with the barcode scanner, so we spent time renaming the programs into a single format (stencil number), and added all other information to t