Electronics Forum | Mon Jun 18 21:20:17 EDT 2001 | davef
It�s sometimes tough to put enough paste on the board before reflow to obtain half-way adequate hole fill with components on a 0.062 inch thick board. So, a 0.093 incher, um. Yano, a lot is determined by board lay-out and how you jigger your profil
Electronics Forum | Wed Jul 18 11:19:58 EDT 2001 | genny
I didn't wade thru all of the info you presented above, but your comment about ampacity of printed circuit boards brought to mind a copy of an article I keep in my files. Luckily I photocopied the whole page from the magazine and can actually tell y
Electronics Forum | Mon Oct 25 17:06:18 EDT 1999 | William
Mario, If you are looking for a cheap press to do press fit connectors, then you are asking for trouble. Now, and in the long run. ASG out of West Palm Beach makes a very good press. We bought a 5 ton version and are able to press up to about 2500
Electronics Forum | Mon Jun 28 12:51:08 EDT 1999 | Scott Cook
| Anyone having any conveyor rail shaking on Electrovert wavesolder machine model "Electra"? The conveyor shakes more with a pallet passing through the machine, particularly when the 20" pallet is passing from spray fluxer to the first pre-heater. He
Electronics Forum | Wed Sep 09 21:20:26 EDT 1998 | Simon Ting
hi, 1206 capacitor with silver/palladium termination is mounted onto a ceramics substrates. Bonding is achieved through conductive epoxy. We discovered that the epoxy cracked and this caused missing capacitor. We had tried different grade of epoxy,
Electronics Forum | Thu Sep 10 09:47:15 EDT 1998 | Earl Moon
| hi, | 1206 capacitor with silver/palladium termination is mounted onto a ceramics substrates. Bonding is achieved through conductive epoxy. | We discovered that the epoxy cracked and this caused missing capacitor. We had tried different grade of e
Electronics Forum | Thu Aug 27 13:56:27 EDT 1998 | Stefan Witte
| Where can I find a good tool to splice 8mm and 12mm paper and plastic part carrier tapes together? Siemens has a pretty good splice tool, which crimps a small brass strip into the tape. The cover tape has to be sticked together with a small strip o
Electronics Forum | Sat Aug 22 00:23:10 EDT 1998 | Arul Vanan
We are using PCBs of CEM3 Material with bare copper fiducials. The whole board is of bare copper with a lacquer coating (Coats brother S2974). The fiducials are of 1 mm diameter bare copper. we use Panasert MV2F as well as Fuji CP4-3. In both the m
Electronics Forum | Thu Sep 10 09:21:27 EDT 1998 | Y.F. Michael Kou
| We are using PCBs of CEM3 Material with bare copper fiducials. The whole | board is of bare copper with a lacquer coating (Coats brother S2974). | The fiducials are of 1 mm diameter bare copper. we use Panasert MV2F as | well as Fuji CP4-3. In bo
Electronics Forum | Thu Aug 13 13:35:38 EDT 1998 | Mike Cox
| I am looking for information on any Gage R&R studies for the CyberOptics LSM solder paste inspection system. If you are a current user of one of these systems, are you finding any problems with the repeatability due to operator variation? What is
