Electronics Forum | Wed Dec 17 10:11:47 EST 2003 | R. L. Garzillo
Hi fellows, I believe that someone on this forum could help me. I would like to know where could I find technical informations about this equipment :Sanyo TCM 3000 . I would like to find on the internet the manufacturer site of it
Electronics Forum | Wed Dec 17 17:57:51 EST 2003 | davef
9. * Conversion coatings are very nice "paints" that allow other paints to stick to aluminum. Type 1 coatings are thicker than Type 3, which are whisper thin. Alodine 120X (Amchem) and Iridite 14-2 (Allied Research Products) are good conversion coa
Electronics Forum | Thu Dec 18 17:43:57 EST 2003 | JD
Good evening all, I have recently gotten rid of our old SRT rework station because of lack of use. Before dumping however I took the CCD camera and monitor in the hopes of turning it into a board inspection station. However, the camera and monitor
Electronics Forum | Thu Dec 25 02:48:45 EST 2003 | Grant Petty
Hi, Thanks for the info, and I will follow up on that. For everyones info, I did a google search and found a company called Passive Components who had most of what we needed in stock, so we did an order via them. We will see how it goes. Lead tim
Electronics Forum | Sun Oct 31 17:36:44 EST 2004 | Ian
GerberGrab does exactly this, and it's low cost, and you can use it for a month for free. It is a sophisticated but easy to use reverse engineering tool which will automatically generate top / bottom BOMs with placement and rotation after teaching of
Electronics Forum | Sat Dec 20 10:22:51 EST 2003 | valuems
Hello, You may not like my idea but here goes. Take the operators in a room and tell them to look at each other. Then tell them that If the solder paste isn't put where it belongs and not placed where it dosen't belong, that some of you won't be in
Electronics Forum | Mon Dec 22 19:53:11 EST 2003 | Dean
Digital camera's are worth their weight in gold! Foremost it's a health and safety issue. That alone should compel the management team to get with the program. As an Engineer I have to know how to operate, program, maintain, troubleshoot and CLEAN
Electronics Forum | Tue Dec 23 11:06:00 EST 2003 | ex maintain leader
I'm agree with suggestion "ceaning importance" you schould make your leader job in three group of maintenace the equipment 1st daily maintenance line operator is responsieble to lean the machine on the surface where is not need any tools required
Electronics Forum | Tue Dec 30 12:51:54 EST 2003 | fastek
This is really taxing my memory banks but I would suggest you focus on axis limits. Bring the placement head to the middle of the worknest, insure the H-axis is in the middle of it's travel, move the U-Axis to the middle of the feeder banks, check th
Electronics Forum | Thu Jan 22 15:37:04 EST 2004 | solderboffin
Hi Vijay The short answer is, there isnt one! Sorry to be vaugue but its pretty much up to you and the quality systems you are working to. The generally accepted interval is every month, but there are not rules. The other issue to face is the defini