Electronics Forum | Sat Jul 02 19:25:37 EDT 2005 | Thaqalain Mahdi
Tom Thanks for reply,u right I am dedicating more than enough time for upgrading and troubleshooting! How can I set back the speed to the lower ram, (100MHz)? Get a bigger and Faster hardrive, 7200 and 10,000 RPM will zip you along! (What these f
Electronics Forum | Thu Aug 04 12:40:38 EDT 2005 | Ted
Hi all, I am wondering what everyone is using as a PCB finish for RoHS. There doesn't seem to be a favorite out there. I know there are many companies using a gold finish but I don't want to pay that much and I have also heard about reliability p
Electronics Forum | Sat Aug 06 11:47:24 EDT 2005 | jax
I have not used the machine so I cannot talk about ease of programming, actual cph, etc... but: There are a few things that interest me. intellegent feeder positioning - doesn't seem to matter where you put them, even while the machine is runnin
Electronics Forum | Thu Aug 11 03:56:11 EDT 2005 | md
Guys, I have a 2.4mm pcb 8layer with a lot of copper on board. I am having some problems with solder not travelling up through the holes. Looking from the bottom of the board it looks fine . Also, To measure temp. of board through preheat zones
Electronics Forum | Fri Sep 09 15:03:46 EDT 2005 | Amol
Hi, I am running a circuit board that needs a part to be put on it after cleaning and before conformal coating. the only problem is that after cleaning and hand assembly of the part, there is a thin whitish residue in the ckt board that one can see w
Electronics Forum | Tue Sep 27 08:22:27 EDT 2005 | Amol
I am using masking tape, the 3M high temp blue masking tape. the problem though doesnt seem to be related to the masking tap as i am seeing pin holes and eventual dewets over entire ckt board (its almost as if the board has chickenpox under black lig
Electronics Forum | Sat Oct 01 01:04:47 EDT 2005 | ck
I face a problem where the components termination is non lead free but solder alloy is lead free. Thus i am using hybrid reflow profile. The specs for the reflow profile i am using: reflow temp. 120 to 160 deg C; time 90 to 120 sec. As for the pak te
Electronics Forum | Tue Nov 01 01:36:27 EST 2005 | mki
Hi, I am looking for opinion about possibility to do BGA rework with SRT-FPD? This early model (before 2000) is equiped with "Variable Perimeter Heater" (VPH). For BGA rework, SRT introduced later "Summit" models with removable nozzles. I am wonderin
Electronics Forum | Thu Nov 10 10:03:02 EST 2005 | R.Powers
Hello, I am a high volume user of bulk component feeding. We are going to be changing some of our feeding interfaces and I need to find suppliers of SMD cassettes. I need someone who supplies just the plastic cassette, not components in a cassette
Electronics Forum | Sun Nov 13 21:23:03 EST 2005 | jaciesla
Hello, I am looking to change from hand soldering to a dip soldering method. The board is double sided (only one side has components though) and has all through hole components currently. I would just like to know if dip soldering would be the best c
