Electronics Forum | Fri Jun 08 12:54:28 EDT 2012 | fredc
The original post was back in 2007. My most recent communication with Peter was last year and he was still having the problem 4 years later. Since it is temperature related, I am suspecting the card in question got partially cooked once and is now al
Electronics Forum | Fri Jun 08 15:26:17 EDT 2012 | aex
I am looking for a technician that can setup a Dek 248 in San Jose, CA sometime next week. It just needs to be set up, powered and have a quick demo of operation. Please contact me if you are able to provide this service or know someone who can. T
Electronics Forum | Mon Jul 02 07:41:08 EDT 2012 | jsolloway
I am going through the process of re-evaluating our AOI systems. Depending on the complexity of your assemblies, I would recommend Mirtec's, and aoi systems as the previous post suggests. Had a demo from them a month or so ago and for the price the
Electronics Forum | Thu Jun 28 16:43:51 EDT 2012 | ssupertuba
Yes I have a KIC and have checked the profile often. I just changed the reel of the parts that are causing problems and it went away. Now what am I suppose to say? I have made an NCMR for the parts but I'm sure they would work in an environment of
Electronics Forum | Thu Jul 05 17:05:46 EDT 2012 | stentech
We did have a facility in Juarez until a few months ago. I know Juarez well. We do have a facility in Guadalajara. I used to do Mexico until it became a little unsafe. Please do keep in touch 603 401 1011 rob@stentech.com. if I can help you or anyone
Electronics Forum | Wed Jul 11 16:40:27 EDT 2012 | georgeg
On the board, LTST-S320KGKT (LED) was supposed to be placed as shown in the figure. The pads and silkscreen with legend were also made as shown in the figure. But after the part was placed on the board, I realized that the sizes recommended by the LE
Electronics Forum | Wed Aug 01 11:22:25 EDT 2012 | davemac62
ERROR: "The specified i/o operation on DeviceHarddisk0Partition01 was not completed before the timeout period expired" This is followed by out of control conveyor speed and zone temps. Oven recovers when the error is acknowledged. This is happenin
Electronics Forum | Wed Aug 08 08:39:56 EDT 2012 | graememurphy
I am charged with maintaining two ZCR/QUAD reflow ovens and one has a problem I have not come across before.... Upon startup it displays the message "CRITICAL TEMPERATURE" but the eight zones are at ambient, the set temperatures being 315°C to 400°C.
Electronics Forum | Wed Aug 08 14:32:50 EDT 2012 | leemeyer
According to Quad data sheet, the max process temp on a ZCR oven is 310C. I am taking a guess that the "Critical Temperature" message may be Quad's way of saying that you have entered to high of a setting. Try bringing the setpoints to something belo
Electronics Forum | Sat Aug 18 10:06:05 EDT 2012 | cyber_wolf
There is no defined method that I am aware of. If your bulbs are old replace them. Other than that adjust the gain and offset until there is clear definition on the edges of the components. Keep an eye on the dump box.If the dump box stays relatively
