Electronics Forum | Thu Mar 11 11:08:22 EST 2010 | geocep
I am using AIM Electropure SN63/Pb37 Solder, & AIM NC266-3 Flux; just like what ACE recommends. I have both Ultra High Pure T-Tanks and a Cryogenic Dewar Tank for Nitrogen, and neither seems to have improved the problem. I place a piece of tempered
Electronics Forum | Wed Mar 10 08:31:22 EST 2010 | sibbe
Currently I'm working on a study of the quality of our SMD process. For this I am investigating the possibility of adding an of-line AOI There has been previous research done (late 2007), bij the company I work for. Since there could have changed
Electronics Forum | Mon Mar 29 16:19:28 EDT 2010 | rodrigo
Hi All, I just realized that our CP-6 is reading only two of three fiducials. Is this normal? The coordinates are not the same and they're numbered 1,2,3. We use the MCS30. I checked the proper data and I couldn't see anything that would cause it to
Electronics Forum | Wed Mar 31 06:08:45 EDT 2010 | miroyu
Hi everyone ! I started to program quad 4C for the first time and have some problems. First, board detection LED and proximity Led (on the front panel) are not lightning whatever I do! Second problem is I teach machine board size, nozzle locations
Electronics Forum | Thu Apr 29 09:18:54 EDT 2010 | rgduval
If you go with a Quad from PPM, I believe that they've developed a windows interface for the machine. They also have a couple of old Quad people working there for continued support. --I receive no benedits from PPM, but I am a happy customer-- We
Electronics Forum | Sat May 29 02:20:08 EDT 2010 | vinitverma
Mch Adjust > Adjust Target > Laser Unit > Nozzle Position. Here the laser will automatically detect the centre of the nozzle. Remember - It'll give you the option of using a component for the test but DON'T use any component. Let it detect the centre
Electronics Forum | Mon May 10 11:49:16 EDT 2010 | hegemon
A huge help in the very first statement, Josh. And yes, fixed vapor mass in the machine I am currently evaluating. OK, and a machine that can change the vapor volume based on a calculation of mass of the assembly sounds logical. (whirrrr,click... a
Electronics Forum | Tue May 11 08:21:16 EDT 2010 | nrw
Hello, I am in the process of setting up processes for a low volume SMT line for internal prototype production, where a 500g jar of solder paste would last weeks. Our distributors only seem to want to supply 500g jars (anything else is significantl
Electronics Forum | Wed May 12 11:02:00 EDT 2010 | eugene123
Hope every one are in good condition. I am Eugene, QA Engineer from Singapore, I been assigned to perform a electromigration test for the test coupon that consist 96 test point. Test condition: 85 deg C, 88% RH and 50V DC Measure Condition: 100V DC a
Electronics Forum | Tue May 18 21:43:02 EDT 2010 | ashley
Hello mickd, 1) The EL data & Vision_type is NOT necessary when using MCS30 for IP1 machine. note : your input of the above might have cause confusion during VP, hence the OS error. 2) I would suggest the following... 2a) lower the Lead_check_are
