Electronics Forum | Fri Jun 09 09:52:03 EDT 2023 | tommy_magyar
I agree with Mainteneer on this. Depending on the active components, I would check the datasheets of them. Particular groups of components to pay attention to: microphones, microprocessors, transformers, relays, switches. Washing may be in some cases
Electronics Forum | Fri Jun 09 16:01:27 EDT 2023 | atpico
Does anyone has any information about MY500 End Of Life and Spare parts availability? Are MYCRONIC MY600 cartridges backward compatible with MY500 ? Does these machines wear well? General reliability opinions? Thank you in advance. Hello again, f
Electronics Forum | Tue Jul 18 00:15:37 EDT 2023 | hazira1991
Is a fresh lot. This bga is old date code 2010. we had received this BGA 2021 and the baking process is done during receiving time. Production received with vacuum seal , its very hard to tell how the BGA handling and stuff and the BGA already EOL. I
Electronics Forum | Thu Jul 20 08:27:18 EDT 2023 | smtusa
I'm not finding much information on Pin transfer being used in modern day equipment for solder paste dispensing. Is there a particular reason time pressure dispensing overtook that method? My understanding is pin transfer is a much faster, more rep
Electronics Forum | Sun Aug 06 17:08:26 EDT 2023 | wijim
Restart the machine: Sometimes, a simple restart can resolve temporary glitches in the system. Check connections: Ensure all cables and connections are secure, as loose connections can lead to data transfer issues. Check for hardware issues: If the p
Electronics Forum | Mon Aug 14 01:29:49 EDT 2023 | calebcsmt
I have noticed on a recent project, the QFN and SOP solder deposits do not seem very uniform and have been leaving little balls, whiskers and icicles of solder paste coming from some pads which leads to bridges. https://imgur.com/a/lqw5RF1 I have u
Electronics Forum | Fri Sep 15 09:26:14 EDT 2023 | georgegr777
Hello everyone, my problem is that my cp40cv pick&place machine is not loading the the machine software and on VME162PA242 card the "fuses" led indicator is blinking. Instead on my second cp40cv machine that works ok the fuses led i
Electronics Forum | Fri Sep 22 00:57:44 EDT 2023 | hazira1991
The actual root cause not yet define. But i do check all that you stated all good setting parameter. 1 week before run the problematic batch, i had run another batch which all the BGA were good no solder short. Just recently i run another batch 21 pc
Electronics Forum | Tue Nov 07 12:07:10 EST 2023 | tommy_magyar
We are mounting an microphone device (SMT package) onto a PCB - how? Surface mount line or hand soldering? Contamination can only come from the solder paste, solder wire, flux, or burning the component/PCB assembly during hand soldering. Unless the
Electronics Forum | Thu Nov 23 04:58:55 EST 2023 | klauss
We have 30 LED PCBs. Only differences between them are size and led counts. there's about 10cm (3.9inches) between smallest and largest board. and leds start from 60 to 80 pcs. and all leds are the same My question is that, do i have to set 30 diffe
