Electronics Forum | Tue Dec 17 14:11:43 EST 2019 | kylehunter
Haven't run those boards again, so haven't had the issue.. Since it seems like we may want to start using more aggressive flux based paste soon, what are some good choices? Ideally I'd like to stay with Kester, since they are readily available. EP2
Electronics Forum | Thu Jan 23 17:24:08 EST 2020 | rvines1
Due to couple of customers who still have some products that are completely through-hole, we use our Universal DIP and Axial equipment on a somewhat regular basis. Our machines are pretty old, but they work pretty well, and we don't do enough throug
Electronics Forum | Wed Aug 11 12:41:05 EDT 2021 | jamesatqkits
Hi Bukas, Thanks for getting back to me. What is the IF board? Is that the Interface Boards in the cage? How do I know if I have a healthy hard drive? Is there anything in particular to look for? I will run chkdsk today and see if it reports any
Electronics Forum | Mon Mar 02 13:06:36 EST 2020 | charliedci
If you add any "flux cored" wire solder to the pot make sure you have ventilation as the flux will burn off and smoke like crazy. This solder pot is like any used in a wave or selective solder, no flux. The flux is added to wire prior to di
Electronics Forum | Fri Apr 03 10:29:29 EDT 2020 | stephendo
Time. The virus does not last a very long time on surfaces. Not sure how long but I read that it does not live long on copper but does last on stainless steel. As far as I know the virus lives as well on gloves as it does on hands. So you still have
Electronics Forum | Wed May 20 16:07:22 EDT 2020 | stephendo
You want a big enough storage tank to smooth pressure. Figure out what size pipes you need and go a size bigger. Make a loop of the pipes with shut offs. That way you can shut down any section and still have air to the rest of the air line. Run the p
Electronics Forum | Tue Aug 18 16:16:36 EDT 2020 | charliedci
We have a Glenbrook Jewel Box 70T, purchased about 5 years ago, Think it was around $60K quoted price (we traded in our old Glenbrook for a discount), Software pretty basic, can store images and has some graphics and image processing capability. It h
Electronics Forum | Mon Aug 17 15:19:16 EDT 2020 | jmelson
I have a (new to me) Quad QSA-30A that I just got about a week ago. At first, I could get it to go ready most of the time, now it will never go ready. I have traced the ready button into the DPRAM board and the logic is OK all the way into one of t
Electronics Forum | Fri Aug 28 17:47:59 EDT 2020 | inspiredmorris20
thanks Stephen!! I'm testing for voltage and have found 24v going through the E-stop to the main switch. If i trip the E-stop i can disengage the main switch. I have no more control to the hardware then that. The software is not throwing any code ot
Electronics Forum | Thu Mar 18 19:53:29 EDT 2021 | lhd_qa
Hello everyone. I am new to the forum so I am sorry if this has been asked before. Does anyone have any suggestions for counting partial reels and cut tape? We are a distributor and for our ecommerce PDC we keep having quantity issues. Currently, we