Electronics Forum | Mon May 01 14:30:14 EDT 2006 | marvindamaniac
I know from previous experiences that off contact printing have helped us reduce bridges and smears under the stencil. I am looking for ANY documentation regarding this topic in order to try to implement a change at our current factory. If anyone ha
Electronics Forum | Thu May 04 08:49:38 EDT 2006 | russ
Please read your manual, I am sure that it will address proper maintenance of your oven ducting and flux build up. The MFGR will also be able to specifically address your problem and let you know if any upgrades are available. Flux collection filter
Electronics Forum | Thu May 25 11:38:07 EDT 2006 | rtorres
Hi Steve I had that problem before and what caused this it was the vibration of the depaneling process, without hitting any component, if the capacitor is too close to the depaneling edge chances are you are facing the same problem I had. The way how
Electronics Forum | Tue May 16 20:50:27 EDT 2006 | darby
There is no requirement for either WEES or RoHS compliance in Australia. If you look up any of the sites for each state's EPA you will find both mentioned but nothing implemented. If we follow the CFC model Oz will probably be 4 years behind the U.S.
Electronics Forum | Mon May 15 08:53:52 EDT 2006 | aj
Hi All, Due to carry out the Bath Changeover this weekend. I have an Electrovert Econopak- 550 kg bath. We are not replacing our internal components i.e nozzles/pumps etc. until we really have to. Has anyine carried out there changeover yet and ha
Electronics Forum | Thu May 18 10:42:41 EDT 2006 | stepheniii
I don't think so. But I want to point out the amount of lead needed to contaminate a joint is microscopic. You won't have lead vapour in your oven and with a clean oven there probably isn't any other way for even a microscopic amount of lead to con
Electronics Forum | Tue May 23 12:23:19 EDT 2006 | stepheniii
I worked for a company that had an industrial nurse come in and talk to us about lead and saftey. Basically she told us in no uncertain terms that we had nothing in the facility that would come close to producing the temperature required to have lea
Electronics Forum | Tue May 23 14:02:47 EDT 2006 | patrickbruneel
Stephen, you better believe the nurse she's right If it would be possible to produce lead vapors you would see lead vapor condensation in the hood or in the ducts. Never seen any lead deposits anywhere. There is no reason for concern The absence of
Electronics Forum | Wed May 17 15:28:34 EDT 2006 | stepheniii
I personally recommend Mydata for small start-up companies with a high mix. I think they make a good first machine. But if you are going to do any volume, I would not recommend them. And with placement machines, paper "research" isn't even close to
Electronics Forum | Mon May 22 23:29:11 EDT 2006 | fordf1502004
I am currently using a sanyo V850 machine. We are haveing problems with the upline and downline communication from the sanyo to any other conveyor. The conveyors we have on hand all use smemma, and the sanyo has an adapter box that connects to the sm