Electronics Forum | Thu Sep 30 21:08:59 EDT 2004 | HOSS
Habba, I think I understand your question. Just to be sure.....you need to use some components that are LF in an otherwise Pb process? If this is your question, then, yes, chances are good that you will not have a problem. Of course you should do
Electronics Forum | Sat Sep 25 10:36:06 EDT 2004 | gpaelmo
Hi, Anyone using this in production? Our company is looking into this model (used). Board size up to to 8"x10", max layer=12, single and double side SMT, medium density mostly passives, max QFP/BGA on board=7-10, 1,000-3,000 boards/wk. Can anyone d
Electronics Forum | Thu Sep 30 03:33:58 EDT 2004 | pioneertechnology
Hi All We have two boards that we produce which are chip on glue. For this we use KME BD12's which use air to dispense the glue dot on to the board. This is not ideal as the glue dot size differs as we go down the tube causing us quality problems.
Electronics Forum | Sat Oct 02 06:14:19 EDT 2004 | goofy
Yes! I now it is a simple question! Can you place audio information on to a mobile phone simm card which you can be play through the phone when you press a key. Example: I place my new simm card into my phone, then the display will change on the phon
Electronics Forum | Mon Oct 04 11:47:00 EDT 2004 | HOSS
We are trying to deploy an Ionograph cleanliness tester and wanted to know what others are using as a standard test sample. My desire is to run the test on a weekly basis using the same medium complexity assembly. We plan to use the testing as a pr
Electronics Forum | Tue Oct 05 16:02:04 EDT 2004 | Bryce
I am curious if anyone can help explain to me the cause of an effect we are seeing with some failed caps. The parts have been found to be cracked and in most cases are hard failures (capacitance well out of spec and DCR less than 100 ohm or shorted)
Electronics Forum | Wed Oct 06 00:18:01 EDT 2004 | crios
We will be outsourcing all of our PCBAs and would like to know if other companies perform DVT testing, ESD, Emissions on all of your boards or only on main boards? Our shipping deadline is near and I would like to determine the risk in not performing
Electronics Forum | Thu Oct 14 17:14:39 EDT 2004 | mattkehoe
We are experiencing a problem with soldermask defined BGA pads not accepting solder during the reflow process. The paste is there when the boards come off the printer but after reflow, no paste. Some other pads in the same pattern are fine. Here is t
Electronics Forum | Tue Oct 19 09:26:51 EDT 2004 | HOSS
Arman, We introduced wireless wrist straps here on a small scale for safety related jobs such as mass lead trimming. These straps operate by the "Corona" effect which, as it turns out amounts to this: You need to drink a case of that swill to conv
Electronics Forum | Mon Oct 18 12:02:06 EDT 2004 | Rob
Hi Guy's, Sorry about this, but yes it's another lead free related question. We are looking at using a Chinese SMD DC-DC Converter in a new design, whilst keeping one eye on the approaching Lead-free issue. The manufacturer claims that these are O