Electronics Forum | Mon Mar 07 10:59:17 EST 2011 | SheanDalton
RK, what are you trying to remove? What are you trying to remove it from? And, what type of equipment do you have? Generically, I suggest a saponifier, related to other aqueous chemistries, is associated with: -- higher PH -- need for effective che
Electronics Forum | Mon Aug 27 22:16:03 EDT 2012 | ilanhovan
Hi, my supplier is using the same Aqueous machine to clean the boards for 2 different customers. My product uses the chemistry of leaded clean flux meanwhile the other product uses the chemistry of lead free with no clean flux, however that product r
Electronics Forum | Thu Dec 07 11:38:04 EST 2000 | Dason C
Please advsie what kind of the solder paste which you are using and we have experience when using Alpha WS609 and found a lot of foaming. Beside, are you using the spray fluxer for your wave or not? If you have spray fluxer then you don't need to u
Electronics Forum | Tue May 23 12:18:25 EDT 2000 | mike weekes
Which companies would you consider for protective coatings, (conformal coating) and other levels of protection? I am taking a fresh look at alternatives. Know any good tests for testing compatability of coating with flux - aqueous or no clean? SMT
Electronics Forum | Mon Feb 19 18:48:59 EST 2001 | davef
For smaller companies, it is difficult to justify the ~$35k cost of products in the class that you sell. On the other side of things, sloshing boards and stencils in a plastic wash pan containing flux thinner is not a good option either. Neither is
Electronics Forum | Tue Feb 20 15:30:23 EST 2001 | kerryn
We have a high-mix, low-volume type shop and clean over 50 stencils per day. The wash and rinse cycles in our aqueous stencil cleaner is ok, but the drying time takes too long (15 - 16 minutes per stencil). You indicate that hot air can damage a
Electronics Forum | Tue Mar 27 09:41:06 EST 2001 | CAL
Our Stencil cleaner is of the Aqueous Technologies variety (AQ-201sc). Being a research company we change chemistries often. We recently have used Petroferm and Zestron Chemistries. Both Chemistries have met all of our expectations to date. Contact I
Electronics Forum | Thu Apr 05 02:54:34 EDT 2001 | GregH
Hi, We are planning to use RMA flux based Solder Paste for our line. We are currently using a No-Clean Solder Paste. Can I use an aqueous cleaner to clean my board with the above paste ? How will I clean the board ? What are the advantages and disad
Electronics Forum | Thu Apr 05 02:56:09 EDT 2001 | GregH
Hi, We are planning to use RMA flux based Solder Paste for our line. We are currently using a No-Clean Solder Paste. Can I use an aqueous cleaner to clean my board with the above paste ? How will I clean the board ? What are the advantages and disad
Electronics Forum | Thu Apr 05 02:56:11 EDT 2001 | GregH
Hi, We are planning to use RMA flux based Solder Paste for our line. We are currently using a No-Clean Solder Paste. Can I use an aqueous cleaner to clean my board with the above paste ? How will I clean the board ? What are the advantages and disad
