Electronics Forum | Fri Dec 09 00:19:51 EST 2016 | aqueous
Hi Dean, We are a manufacturer of cleaning equipment. I'm not sure if your machine is one of ours or another brand. Regardless, I am happy to provide assistance. In order to maximize the level of "helpfulness", it would be helpful for me to know mor
Electronics Forum | Thu May 30 10:31:03 EDT 2002 | robbied
Hi Yannick. This is an issue that we are just recently getting into but here is some ifo that I have gathered so far. I have seen/ used 2 different rework machines. The one we have bought is a 'PACE TF2000' which was at the lower cost end of the mar
Electronics Forum | Wed Feb 01 11:48:55 EST 2006 | russ
I would recopmmend contacting Aqueous technologies or Smart Sonic along with other Mfgrs. They will be best suited to evaluate your needs.
Electronics Forum | Wed Feb 01 12:57:51 EST 2006 | wheels_in_the_well
There are several makes of stencil cleaning equipment. The previous post mentioned, Aqueous Tech (www.aqueoustech.com). Others of long standing high reputation are EMC Global (www.emcgti.com), Austin American Technology (www.aat-corp.com), and Tech
Electronics Forum | Thu Nov 21 11:10:07 EST 2013 | luciano
Hello, We've just started using VIGON A200 in our Aqueous Trident XLD system and observed that aluminium electrolytic capacitors get corroded. Concentration was set at 20% and washing is done by spray at 150F for 6 to 8 minutes. Then is rinsed seve
Electronics Forum | Mon Jun 19 09:47:23 EDT 2017 | georgetruitt
You have a lot to think about! What does the flux manufacturer recommend as far as specifics like water temp or pressure? Do they recommend high temp di-water a detergent or saponifier? Do you currently have a cleaning machine, batch cleaner or inl
Electronics Forum | Fri Dec 24 05:12:08 EST 2004 | Patrick Tavernier
Hi ! Thank's for your replies. I'm seeing you're very concerned about this subject. I think RoHS and WEEE arrive too soon. Not technological solution about whiskers and tin pest. RoHS implicates a lot of money for to implemente news process. We must
Electronics Forum | Thu Oct 28 11:50:11 EDT 2010 | phase1
We are having a little trouble with what appears to be a crystalization between our fine pitch parts. The problem appears after a a thourough wash of the pcb when dry. It looks like lead wiskers/haze between the joints.We are using water soluable lea
Electronics Forum | Fri Dec 08 02:40:45 EST 2006 | Mike Konrad
Hi 'K', We manufacture both batch and inline defluxing equipment so we have no axe to grind with either technology. There are pros and cons associated with both technologies under specific conditions. Batch machines are typically good cleaners but
Electronics Forum | Tue Oct 09 12:23:07 EDT 2001 | Mike Konrad
Hi Danial, Yes, you can use one cleaning chemistry for all paste types. There are many available chemistries from many manufacturers. The chemistries that I would recommend include: StencilWash Plus from Aqueous Technologies http://www.aqueouste