Electronics Forum | Tue Jan 22 07:34:07 EST 2002 | cabjerk
Hi All; We are having problems finding software for off line programming of our GPD machine. We have talked to GPD and no luck. Any leads out there? Thanks Carl B.
Electronics Forum | Fri Feb 08 14:46:25 EST 2002 | dod
Unicam has an interface that will program the dispense machine from GPD and the ouput has been validated by GPD.
Electronics Forum | Thu Feb 28 13:59:54 EST 2002 | Jeff
CircuitCAM is a Partner with GPD and worked along with GPD to create the interface to support their dispensers.
Electronics Forum | Mon Jan 28 12:09:27 EST 2002 | billschreiber
Hello Carl, Smart Sonic has introduced the Assembly Module for off line programming of assembly equipment such as GPD. You can see it on the Smart Sonic website: http://www.smartsonic.com Click on the AOI/StencilScan and GlueScan link. If you hav
Electronics Forum | Tue Jan 22 20:30:44 EST 2002 | davef
Start with the following: * Aegis ISC (Circuit CAM) * Mitron (GenRad) (CIMBridge) * CAE Technologies (C-Link)
Electronics Forum | Mon Jan 28 17:34:32 EST 2002 | PeteC
The product mentioned by SmartSonic (stencil cleaner maker) is from ScanCAD International. See http://www.scancad.com
Electronics Forum | Mon May 26 08:23:49 EDT 2014 | mun4o
hi all, we have smd line with 2 Assembleon topaz X.The real speed of the line is about 12- 13k cph.I want to increase this speed.I intend to buy a Assembleon sapphire and change one of topaz with sapphire ( chip shooter).Has anyone of you similar c
Electronics Forum | Thu May 29 22:06:24 EDT 2014 | proy
Hi You might want to join and post this on my Yahoo Assembleon users group, it is new so we only have 6 or so members, but as it grows it will be more and more useful. My 2c worth is that a sapphire might be kind of old and problematic for support
Electronics Forum | Fri Jul 24 07:56:40 EDT 2009 | thanhnguyen
hello all I have a Assembleon Topaz. at head # 2 everytime it going down to pick up the part, it just blowing the part off from feeder, i did replace vacuum vale but still doing the same. any input is helpful. thanks
