Electronics Forum | Thu Jul 15 16:07:39 EDT 1999 | Doug
| | I'm looking into vision inspection equipment to automatically inspect SMD placement and solder joint quality. Does anyone have any recommendations or know of any commonly used equipment? Do other manufacturers use vision systems at their inspec
Electronics Forum | Mon Jul 12 12:28:10 EDT 1999 | Wolfgang Busko
| I need some advice concerning reflow of a BGA-292. Since I am not ready to change my entire process to no-clean, I decided to place the lone BGA-292 on a proto run using our BGA re-work station. The pcb is a moderately dense, single-sided, 8-laye
Electronics Forum | Mon Jul 12 12:39:39 EDT 1999 | M Cox
| I need some advice concerning reflow of a BGA-292. Since I am not ready to change my entire process to no-clean, I decided to place the lone BGA-292 on a proto run using our BGA re-work station. The pcb is a moderately dense, single-sided, 8-laye
Electronics Forum | Wed Jul 14 14:05:52 EDT 1999 | KT
| I need some advice concerning reflow of a BGA-292. Since I am not ready to change my entire process to no-clean, I decided to place the lone BGA-292 on a proto run using our BGA re-work station. The pcb is a moderately dense, single-sided, 8-laye
Electronics Forum | Thu Jul 08 13:21:18 EDT 1999 | Bob Barr
Ron, We use 100 pin straddle mount connectors on some of our 1.6mm boards (up to eight per board.) They come to us from the vendor with a bead of solder on the somewhat 'J' shaped leads. Our process is as follows: Mount connector to board with hard
Electronics Forum | Tue Jul 06 16:44:14 EDT 1999 | John Thorup
| Is anyone aware of some guidelines regarding through-hole in SMT pads? One of our designers wants to add through-hole leads in some SMT pads for an inductor. The size of the hole is 0.032 inches and takes-up approximately 25% of the pad area. Th
Electronics Forum | Wed Jul 07 15:30:18 EDT 1999 | JohnW
| | We are looking for some subcontractors to do surface mount | | technology boards for us. Is there anything I should pay specific | | attention when I visit the subcontractor's site? | | Thank you for any advice | | | Carol, | | Someone bel
Electronics Forum | Sat Jul 03 18:45:19 EDT 1999 | Scott Cook
| John, | | You said a bunch. My biggest problem running Fuji, Panasonic, or Sanyo high speed stuff is that they are meant to run free. They are meant, in my mind, to run as thoroughbreds. | | I watch 6" reels placed on feeders, placed on the carts
Electronics Forum | Wed Jul 07 08:54:20 EDT 1999 | M Cox
Snip | John, | | You said a bunch. My biggest problem running Fuji, Panasonic, or Sanyo high speed stuff is that they are meant to run free. They are meant, in my mind, to run as thoroughbreds. | | I watch 6" reels placed on feeders, placed on the
Electronics Forum | Sat Jul 10 12:57:15 EDT 1999 | Steve
| | John, | | | | You said a bunch. My biggest problem running Fuji, Panasonic, or Sanyo high speed stuff is that they are meant to run free. They are meant, in my mind, to run as thoroughbreds. | | | | I watch 6" reels placed on feeders, placed on
