Electronics Forum | Fri Mar 30 14:14:28 EDT 2007 | jaimebc
"This is how I rate changeover time capability (includes PCBA first article): Greater than one hour: improvement needed, competitive disadvantage Approximately one hour: good, about average for the industry Approximately 30 minutes: very good, clo
Electronics Forum | Sat Apr 14 08:23:29 EDT 2007 | davef
Laser soldering suppliers are: * Seica [low cost firefly A-30]; 45 Osgood St 1st Flr, Methuen, MA 01844; 978-683-8356 F8357 seicatestsolutions.com/pages/24/A30-Firefly-Solder-Station.php; Dave Sigillo [GM] sigillo@seicausa.com * Leister Process Tech
Electronics Forum | Wed Apr 04 23:36:09 EDT 2007 | Brandon
Ok so.... I have a boss who thinks there is nothing wrong with stacking completed boards smt&thru in totes and submitting them to QA like this. I mean piled upon one another in a tote. Now... it has fallen on me to try to explain in a convincing mann
Electronics Forum | Mon Apr 23 11:49:46 EDT 2007 | ck_the_flip
Wow, you're using the Surface Mount Adhesive for mechanical vibration? I've never heard of SMT adhesive being used for things other than holding the components in place before wave solder. Does it work for mechanical purposes? Glue/Wave is a proce
Electronics Forum | Sat Apr 21 08:26:57 EDT 2007 | Cmiller
Has anyone experienced a problem with conformal coating adhesion to IS-410 boards? We are having problems with one suppliers boards. IS-410 boards from other suppliers are fine and all FR-4 boards that I have looked at are fine. We are using Conap
Electronics Forum | Mon Jul 16 10:21:29 EDT 2007 | samir
d0mino, Given the fact that the SLIMKic has built in wave detection, you can just make a pallet out of 10mm delmat material, and drill a couple of holes on the pallet for the wave detect T/C's (ports 2 & 3 for left and right). All the wavesurfer is
Electronics Forum | Fri Aug 17 10:50:15 EDT 2007 | Frank
I agree that the documentation should be used and not necessarily the silk screen. The silk screens can be a first line of defense, but nothing beats the proper documentation. Years ago I visited a contract manufacturer that a friend was working at
Electronics Forum | Sat Sep 08 08:55:24 EDT 2007 | davef
We expect to see a copper shadow along the edge of pads when soldering boards with organic solderability protection [OSP]. IPC-A-610 has defined this as acceptable for years. During early reflow stages, the flux in paste dissolves the OSP where ther
Electronics Forum | Thu Sep 20 16:06:23 EDT 2007 | jmelson
Are these shorts occuring after reflow, or are they shorted on the incoming boards before stuffing? If the latter, is the fabricator doing electrical test? How are these boards getting past their electrical test? Especially if multilayer, there's
Electronics Forum | Wed Oct 17 09:19:23 EDT 2007 | actech
This box has the I/O card mounted sideways under it's own cover on the side of the main box. The CPU card is the bottom card. The Two driver cards X/Y and R/Z are side by side and mount to a steel base pannel with there relays at the back. but even i