Electronics Forum | Mon Oct 13 11:18:37 EDT 2014 | dilogic
parameters -> axis that z axis for head2 is also enabled ("axis mounted" must be 1)
Electronics Forum | Tue Nov 01 14:40:22 EDT 2022 | glasscake
Also to diagnose if it is the correct axis go to the "calisim" or the "axis position" option in utilities and get to the "current position" menu. Estop the machine and move the relevant axis by hand and see if the encoder count goes up.
Electronics Forum | Fri Jan 06 09:39:35 EST 2023 | micropak
In newer machines, after changing a motor you have to do an "Axis Home Calibration". Once I changed Z-Axis belt on an SM-482 and it refused to successfully do "Axis Home Calibration. Then the solution was to remove the belt, rotate the motor pulley a
Electronics Forum | Sat Jun 25 01:05:13 EDT 2005 | pci
check the X axis belt , guides and Z axis motor
Electronics Forum | Mon Jul 18 08:57:31 EDT 2005 | tommyttr
It is either the axis card, or the head bd. reporting corrupted data
Electronics Forum | Wed Aug 26 10:52:30 EDT 2009 | fujiphil
check R-axis mechanical backlash...
Electronics Forum | Thu Sep 15 19:14:31 EDT 2011 | jeffjarmato
Vitrox now has an AXI similar to the Agilent, Contact info http://www.evotest.com
Electronics Forum | Wed Mar 06 10:58:24 EST 2013 | orlando216
Yes I can move the x1 axis, and there is no error code.
Electronics Forum | Tue May 03 22:55:53 EDT 2016 | ttheis
Also it might be a failed axis controller card in the VME; check for any red fail lights.
Electronics Forum | Wed Feb 01 03:10:03 EST 2017 | jgo
Last thread was started in 2011. I'm wondering today what would be a good choice for an AXI system?
