Electronics Forum | Wed Apr 20 22:06:32 EDT 2016 | ttheis
With desktop/workstation computers I am of the opinion that they should be left to run 24/7 to avoid thermal cycling daily in order to prolong their life. I have dozens of computers between my home and business and I have had good success with this f
Electronics Forum | Wed May 25 10:01:59 EDT 2016 | stevedc
I tend to get issue on and off with the feeders either stalling and/or running slow/noisy. They are actually pretty easy to clean and maintain. If you take off the side panel of the feeder you will see a few gears, belts and a motor. The first thin
Electronics Forum | Tue Sep 20 15:00:26 EDT 2016 | awhite
Got it!!!!! On the main Operator Screen for the MPM UP2000, and under configuration (when logged-in under maintenance), it gives you ONLY the settings that the machine is set to....there are no drop-downs or options available to choose from. Very fr
Electronics Forum | Tue Nov 08 10:52:29 EST 2016 | aemery
Tom, Hardware limit means the machine thinks it is at the limit sensor or a particular axis timed out before it got to the home sensor during the reset sequence. Go to your O/I map and see if any of the axis limit sensors are lit. You could have a
Electronics Forum | Fri Nov 18 09:21:41 EST 2016 | sumote
Lazy operators empowered by management. Sounds like you may have some nepotism? Since it falls to you to clean up someone else’s mess I have an idea for you. I once worked for a company that had a large wash sink with a hand sprayer very similar to
Electronics Forum | Tue Nov 22 21:57:17 EST 2016 | Miche
Hello Dears, I'm a small CS Engineering at Taiwan.There are some problem on DIMM connector area with poor solderability at ODM. It was random on Dimm connector area and the SMT area is fine. At the same time, there were other PCB vendor's product whi
Electronics Forum | Tue Jan 24 09:21:34 EST 2017 | emeto
there is an IPC standard for machine accuracy and repeatability. Here it is how it works. You have to place certain number of parts on a specially designed PCB(that allows placing variety of parts on big part of the machine work area). After that you
Electronics Forum | Thu Jan 26 03:06:51 EST 2017 | vukasin
Hi all, Let me introduce you to my problem. Few months back I formed my first line and now at this point in time AOI inspection is a must. Because of a budged I decided to bay Trion 2340. Little that I known machine came in without external convey
Electronics Forum | Tue Feb 07 09:54:25 EST 2017 | rgduval
Are you having any issues with other ERJ series resistors from Panasonic? Any other 2010 resistors? There is, very likely, something specific to this part/package/packaging that is causing your problems. Things to check: -Identify where the issue
Electronics Forum | Thu May 18 07:37:06 EDT 2017 | stephendo
I have just been asked to project manage the > introduction of new production line within my > organisation . This normally wouldn't be a > problem but I have very little experience on smt > manufacturing. I guess the hard part is done as > all