Electronics Forum | Mon Jul 08 17:07:15 EDT 2013 | wsdauchy
We have 2 CS9100 Schleuniger wire cut/strip machines. They do not have the DISPLAY/PC switch on the back of the CPU card. THe two machines come up PC mode. Any one know of a jumper setting on the CPU board that will allow the machnies to run in DI
Electronics Forum | Tue Aug 13 11:20:41 EDT 2013 | horchak
Is this a new issue? You could run a wide piece of masking or duct tape along the oven seal on the outside just to see what happens. What is the heating plate configuration. Are they solid from front to back or split. My thought here is if there is a
Electronics Forum | Wed Sep 18 10:29:22 EDT 2013 | cyber_wolf
Here is what I can tell you... The chemistry we use has adverse reactions with WS fluxes.Vapor degreasing can remove coatings and markings on some components. It can also roach certain types of plastic. On the other hand it works extremely well for r
Electronics Forum | Fri Oct 18 12:40:35 EDT 2013 | robertwillis
Back in the mists of time there were two papers on the use of Parylene Coating and the improved thermal cycling results in 1990. It was on LCCC then shortly after on BGA. Does anyone know of results of recent trials or have a copy of the BGA papers.
Electronics Forum | Tue Nov 19 12:34:33 EST 2013 | jimmyboz
I am not trying to be critical but, you didn't even say Fuji CP-6 problem. There are CP-6, CP-642, and CP-643 machines, are asking 2 model as 642? Anyway, slow the cam speed down in the proper to 40 or 50%. If the problem goes away check the mainte
Electronics Forum | Mon Nov 17 06:32:00 EST 2014 | leeg
Gary, we use the text output file from production planning to produce common setup sheets. We wondered if we just moved 1 feeder on the machine is there a way we could combine the programs back together and fix their positions so that when we optimis
Electronics Forum | Thu Apr 10 18:26:52 EDT 2014 | superlen
More questions about programming components. Is > there a comprehensive programming guide for these > machines? How does "image capture" & "Autoteach" > work? we have a few parts that we are struggling > with and they seem simple devices? Pics >
Electronics Forum | Wed Mar 19 17:18:24 EDT 2014 | aybars
I would suggest to check your servo amps. on both gantries and both axis.Does it rattle both heads or just one? Since you did not specify this in your question,I will say check all 4 servos in the back side of your machine.Hope this will help and goo
Electronics Forum | Thu Apr 10 04:52:18 EDT 2014 | eoghan
Update... I have gotten the screen to function, but the router does not go beyond the boot screen. The IT guy here tells me it is a hard drive failure and that will need to be replaced. The data on the hard-drive is non retrievable. Does anybody kn
Electronics Forum | Fri Apr 25 05:05:26 EDT 2014 | briantmc
Hi Bobpan, Many thanks for your response. While none of your suggestions were new to me it did get me to thinking and going back to the start again only to find incorrect switch settings on the Theta Driver Card. PROBLEM SORTED! I don't know how
