Electronics Forum | Wed Jul 10 19:17:06 EDT 2013 | m20lara
Hello all. I was hoping that maybe someone has a > manual for a Omniflo 5. Build year is 1998. > Photocopies would be greatly appreciated, and > willing to pay. Even if we could put down a > deposit, you send the manual we do the photocopy > and
Electronics Forum | Tue Apr 30 10:03:31 EDT 2013 | mmjm_1099
Got it powered back on Friday.... We did check the UPS (power-supply)and indeed it was bad. So we referenced the manual and found you can bypass the UPS all together. So we just directly plugged the machine past the UPS. Well the machine is running b
Electronics Forum | Tue May 07 09:32:39 EDT 2013 | ngineer
Yesterday, my Quad IVc was on, but not running. There was a power fluctuation. I immediately got a motor err #5. I checked all the doors were closed, tried to home / reset the machine, and then turned it off and back on. Neither breaker was trip
Electronics Forum | Tue May 07 09:33:04 EDT 2013 | ngineer
Yesterday, my Quad IVc was on, but not running. There was a power fluctuation. I immediately got a motor err #5. I checked all the doors were closed, tried to home / reset the machine, and then turned it off and back on. Neither breaker was trip
Electronics Forum | Wed May 22 11:00:14 EDT 2013 | davef
Senor Tech: Roland and I talked about this situation in our weekly meeting and thought that it would be neat to add a feature to 'Equipment Wanted' that allowed the listing to be a blind Request For Quote [RFQ]. In this, the RFQ not show on the onlin
Electronics Forum | Wed May 22 19:41:11 EDT 2013 | bvdb
We're located in New Zealand running an older Fuji pick-and-place machine that uses long rubber conveyers about 1/8" diameter and 8 feet long to move the PCB through the machine. The ones on our machine are old and keep breaking. We've been repair
Electronics Forum | Thu May 30 12:27:25 EDT 2013 | ericrr
I was more interested to read up on paste, As for the short run of 50 panels was finished, the panels dribbled out slowly. about three times the second day I took off the paste, mixed it up and put it back on, seems to do the trick. Also I gave ea
Electronics Forum | Fri Jun 21 03:11:29 EDT 2013 | rollon65
Hi Bobpan. Thanks for the reply. I had already tried red stickers as suggested in the manual, then blue then silver but none of those worked so white was my last resort. I'm running 3 machines in tandem and they all start at the same time so stopp
Electronics Forum | Mon Jul 01 11:29:02 EDT 2013 | hegemon
I am guessing a lead free process. From the pictures, I don't neccessarily see any issues, perhaps the leads have wicked up a little too much solder, making the joint look a little starved. But I think I see nice toe and side fillets. In the worst c
Electronics Forum | Wed Jul 17 06:54:17 EDT 2013 | deanm
We manufacture according to military Class 3 standards and we do not vacuum seal any MSD devices. Your current method of dry packing is sufficient as well as dry cabinet or nitrogen storage. A light evacuation of air during the dry packing process
