Electronics Forum | Tue Oct 07 14:23:37 EDT 2003 | Adam
The Omegameter (or Ionograph) detect contamination by measuring the conductivity of the solution used to extract the board. This conductivity number reflects the sum of all of the ionics in the extraction solution. Unfortunately, we can't sort out th
Electronics Forum | Fri Oct 17 16:55:30 EDT 2003 | russ
Okay, I'm here in Colorado and I used indium 92J and loved it. My test dept. hated it! It leaves a pretty large amount of residue that apparently increased the pin maintenance. The company I worked for actually switched from this paste to another b
Electronics Forum | Mon Nov 10 10:47:10 EST 2003 | stefwitt
It appears to me, that there is a conflict between European and American management. I remember the headlines, when Mercedes bought themselves into Chrysler, that the American top managers earned almost three times as much as the Germans. I�m not s
Electronics Forum | Thu Mar 25 11:19:11 EST 2004 | paul_bmc
Thanks for the informative posting.. When I power up the machine this is what I get.. 1. The movable cutter does not actuate the cutter knifes. (The head still jogs 360 and the movable cutter moves in the linear axis but the c&c motor does not act
Electronics Forum | Fri Apr 02 09:50:40 EST 2004 | cedams
Yup. It was definitely checking the fiducials as well as the block skip marks and it used to work pretty well. What it did was started at the center of where the fiducial should be and scanned left. When it found a change in contrast it scanned righ
Electronics Forum | Fri Apr 02 10:23:38 EST 2004 | mapell
Hey Matt We manufacture reflow equipment and use all types of profilers. We currently use ECD, KIC, and DataPaq in our testing depending on how our customers want to see the data. In my experience they are all good systems. I have not really ru
Electronics Forum | Mon Apr 12 07:44:50 EDT 2004 | wgaffubar
Former company we use to replace No Lead BGA's by using dot dispense to apply eutectic solder to pad with same volume the stencil printer. Current company process removes bad BGA, wicks off solder paste then Hot Gas Reflows new No Lead BGA to bare pa
Electronics Forum | Mon Apr 12 15:52:12 EDT 2004 | wgaffubar
I am using Indium 92J type 4 solder paste due to a BGA site with .008" pads and stencil opening of .009" square and .005" stencil thickness. When I try the type 3 we get insuffecient print. The aspect ratio tells me that I should be using a type 4. T
Electronics Forum | Thu Apr 29 11:07:03 EDT 2004 | arcandspark
You are right about the very poor support for smaller customers. I had told them we were looking for another paste and now they have sent the reginal manager and the US sales manager has come by to see what they can do for us. All they keep saying is
Electronics Forum | Sun Apr 18 05:02:53 EDT 2004 | Rob
Hi, I am a Quality person (Metalwork fabrication and System assembly)but have not had any experience of SMT before. I am trying to put some SPC in place for reflow and others and have come across something I do not understand. Our current SPC Chart c
