Electronics Forum | Mon Jun 28 09:15:21 EDT 2004 | jdumont
Morning all, we have been seeing some problems with the edges of some of our BGA's curling away from the PCB after reflow. Is this possibly a moisture problem? If so what would be a good time/temp to bake them at to rectify the problem? Thanks in
Electronics Forum | Fri Feb 19 06:45:29 EST 1999 | Charles Stringer
Does anybody have any reliable alternatives to device bake out for plastic bodied components. We do not use a whole package at time and therefore have to oven bake the balance before we can use them. I have come accross dry nitrogen storage chambers
Electronics Forum | Sun Apr 18 03:58:26 EDT 1999 | P.L. Sorenson - Technical Consultant
| While trying to sell me a low temperature baking system for SMDs the salesman mentioned that the 125C for 24hr bake had been known to cause co-planarity defects. | I thought I'd ask some experts. Any help guys? | To remove moisture from low quanti
Electronics Forum | Fri Apr 16 19:52:39 EDT 1999 | Scott McKee
| While trying to sell me a low temperature baking system for SMDs the salesman mentioned that the 125C for 24hr bake had been known to cause co-planarity defects. | I thought I'd ask some experts. Any help guys? | Let me get this straight... He's
Electronics Forum | Mon Apr 19 17:44:43 EDT 1999 | Chrys Shea
| | While trying to sell me a low temperature baking system for SMDs the salesman mentioned that the 125C for 24hr bake had been known to cause co-planarity defects. | | I thought I'd ask some experts. Any help guys? | | | Gerry: I imagine there co
Electronics Forum | Thu Aug 09 09:05:09 EDT 2007 | davef
There are no requirements acceptance criteria for baking of board assemblies. What are your customer requirements? The common reasons people choose to bake PCB are to prevent: * Delamination of multilayer boards * Measles, particularly on double si
Electronics Forum | Thu Aug 09 19:13:37 EDT 2007 | htran
DaveF, Our customer requirement is to comply with IPC-STD-001 but the J std doesn't specify the bake out temperature for populated boards and the moisture absortion rate. Right now we are baking the populated PWAs after aqueous wash at 80C at 18-48
Electronics Forum | Thu Aug 16 13:00:32 EDT 2007 | russ
Here is what you need to do if you can, Since you want to shporten the bake time you need to increase temp. weigh a board prior to your current bake process (you need very hi resolution scale for this) weigh the same board after current process a
Electronics Forum | Mon Jul 21 11:10:29 EDT 2008 | davef
We blab about component baking all the time. Search the fine SMTnet Archives for more, like: http://www.smtnet.com/forums/Index.cfm?CFApp=1&Message_ID=52970 Here is good background materal on MSD: http://www.smta.org/msd/msd.cfm
Electronics Forum | Mon Feb 22 13:15:43 EST 1999 | Dave F
| Does anybody have any reliable alternatives to device bake out for plastic bodied components. We do not use a whole package at time and therefore have to oven bake the balance before we can use them. | I have come accross dry nitrogen storage cham
.gif)
winsouce.jpg)
