Electronics Forum: bare (Page 1 of 100)

ICT bare board

Electronics Forum | Mon Mar 12 08:00:14 EDT 2007 | rgduval

It sounds like you may be thinking of two different test methodologies. What is required? Bare-bard testing, to verify pcb fabrication? Or populated board testing, to verify manufacturing? If it's bare board testing, the fab house should advise a

ICT bare board

Electronics Forum | Sat Mar 17 04:50:58 EDT 2007 | tanemmirt

thanks davef, your help was really segnificant.

bare board problem

Electronics Forum | Thu Jun 17 17:26:56 EDT 1999 | wayne sanita

first of all what is the technical term for the small amount of solder on a plated pad. we are getting poor screen printing gasketing on a 20 mil qfp due to this solder not being even or too high in spots and not covering the length of the pads. any

ICT bare board

Electronics Forum | Tue Mar 13 21:28:16 EDT 2007 | davef

Try this: http://www.accutroninc.com/download/ict.pdf We have no relationship, nor receive benefit from the company referenced above.

Re: bare board problem

Electronics Forum | Fri Jun 18 17:47:09 EDT 1999 | Scott Cook

Carson Valley Inn be hanged, Moonman Carson Valley Inn, Wow they should have a plague there that says, "Mike Cox once Stayed here", Good Ol days Mike, until 4 years ago when I built my current home and moved, I was STILL rece

Counterbore a bare hole

Electronics Forum | Tue Jan 09 11:25:45 EST 2007 | gerryb

Because of some mechanical issues we believe that we need to counterbore 2 holes on one of our 2.4mm pcbs. We want to counterbore to a 0.5mm depth. The unplated hole is 4mm diameter and the counterbore diameter is 7.5mm. We have never done this befor

ICT bare board

Electronics Forum | Mon Mar 12 03:41:25 EDT 2007 | tanemmirt

i designed a new product; i want to produce it in china, so they requested the ICT to be done; i have 03 questions if some one can help me on: 1� is it mondatory to test all components and paths in the PCBA; and check all soldering joints? 2� testing

ICT bare board

Electronics Forum | Tue Mar 13 04:43:57 EDT 2007 | tanemmirt

thanks a lot robqd3 and davef for your assistance,just a littel question concerning testing soldering joints, is it enough to ask the producer to test all my soldring joints without modifying any thing in the ciruit (( adding vias etc...)) if i ha

ICT bare board

Electronics Forum | Tue Mar 13 07:39:19 EDT 2007 | tanemmirt

thanks a lot robqd3 and davef for your assistance,just a littel question concerning testing soldering joints, is it enough to ask the producer to test all my soldring joints without modifying any thing in the ciruit (( adding vias etc...)) if i have

Re: bare board problem

Electronics Forum | Thu Jun 17 19:40:11 EDT 1999 | Scott Cook

first of all what is the technical term for the small amount of solder on a plated pad. we are getting poor screen printing gasketing on a 20 mil qfp due to this solder not being even or too high in spots and not covering the length of the pads. an

  1 2 3 4 5 6 7 8 9 10 Next

bare searches for Companies, Equipment, Machines, Suppliers & Information