Electronics Forum: bare and board and profiling (Page 1 of 13)

Wave flux and profiling

Electronics Forum | Wed Dec 20 04:43:36 EST 2006 | greg york

Any decent flux would volatise off with the heat of the wave unless absorbed into the solder mask. Test this by trying to clean in alcohol or common solvent aerosol, if it does not clean then it is probably Mineral Salts from solder mask fillers. Ano

Convection Oven and thermo profiling of Circuit Boards

Electronics Forum | Mon Apr 17 19:42:34 EDT 2000 | Russ Cutler

We just bought a new Heller 1800 EXL reflow oven for reflowing SMT boards. We us a low temp RMA solder paste with 2% silver. Everything we build is to IPC Class 3 specifications. We have approximately 600 different types of circuit boards we build

Re: Convection Oven and thermo profiling of Circuit Boards

Electronics Forum | Wed Apr 19 11:54:32 EDT 2000 | Rudolf Niebling

You need a KIC profiler whitch is able to find optimal profiles for your boards. The KIC works very well with the Heller ovens. With the KIC is also possible to find one good profile for different boards. Get in contact with KIC +1-858-673-6050

Re: Convection Oven and thermo profiling of Circuit Boards

Electronics Forum | Mon Apr 24 14:08:19 EDT 2000 | Finepitch Services

My agreement with all this started by Arturo's message... Just as a reminder, I guess he suggested to have still "one profile per board" which I completely agree... So, Board #(1,600) could be using a Recipe #(1,10) but it should still be saved as

Re: Convection Oven and thermo profiling of Circuit Boards

Electronics Forum | Wed Apr 19 14:07:20 EDT 2000 | Russ Cutler

Let me see if I've got this straight...rather than hook up a MOLE or a KIC profiler to each and every board (600 P/N's in my case), most people are making judgement calls based solely on how similar a board looks to another board, for which they have

Re: Convection Oven and thermo profiling of Circuit Boards

Electronics Forum | Wed Apr 19 18:02:34 EDT 2000 | Mike Flori

If you can divide your boards into different categories it allows you to determine a different starting profile for each category, based on size, # of layers, etc. When you get a new board to profile you'll have an idea what settings will get you clo

Re: Convection Oven and thermo profiling of Circuit Boards

Electronics Forum | Wed Apr 19 10:52:29 EDT 2000 | Arturo

Russ: you could divide your 600 in let's say 10 or more categories,category #1 could be the thinnest thickness and smaller board size and smaller components;category #2 thinnest thickness smaller board size and mixed small and big components; and so

Re: Convection Oven and thermo profiling of Circuit Boards

Electronics Forum | Tue Apr 18 19:37:35 EDT 2000 | Russ Cutler

Let me be more specific about my dilema. We have used a vapor phase reflow process for many years. We just bought a Heller 1800 this year (2000). We may very well be able to run all 600 very different board types we build in 10 recipies on the Hel

Re: Convection Oven and thermo profiling of Circuit Boards

Electronics Forum | Mon Apr 17 19:54:39 EDT 2000 | Dave F

Sounds like a true IR guy to me!!! Your profile should reflow solder on the board properly to produce a reliable product for your customer. If that requires more than one proifile, so be it!!!. That being said, we went from hundreds of IR profiles

Re: Convection Oven and thermo profiling of Circuit Boards

Electronics Forum | Tue Apr 25 22:59:59 EDT 2000 | armin

If I were you, I would divide my boards into categories...and I'll categorize them by their components e.g. Bds with BGA, with QFP, Bds. with plain chip components...and so on...this is to create a recipe for each components with QFP's, BGA's etc...t

  1 2 3 4 5 6 7 8 9 10 Next

bare and board and profiling searches for Companies, Equipment, Machines, Suppliers & Information

December 2024 Auction

World's Best Reflow Oven Customizable for Unique Applications
Thermal Interface Material Dispensing

Smt Feeder repair service centers in Europe, North, South America
High Throughput Reflow Oven

High Precision Fluid Dispensers
Win Source Online Electronic parts

Software programs for SMT placement and AOI Inspection machines from CAD or Gerber.