Electronics Forum | Tue Dec 16 23:57:58 EST 2003 | Grant Petty
Hi, Thanks for the feedback, and this has been helpful. Still not sure what we are going to get yet though. We are based in Australia, so it's also dependent on local support. This can be a problem, because when everything is going ok, all the sal
Electronics Forum | Thu Dec 11 20:38:37 EST 2003 | davef
Here is a study on printing factors study on CSP [we understand that you asked about fine pitch, but hey, it's close and FREE] http://nepp.nasa.gov/docuploads/2A524D62-7032-4C0D-BBDED6CFFC2FA07B/SMTA-I-Joint-Paste-2004.pdf It's interesting that whi
Electronics Forum | Fri Jan 16 15:31:26 EST 2004 | davef
Bill This drives solder suppliers nuts, because it's not analytic: Dross inclusion testing can be conducted on the base solder in the solder pot and the virgin solder. Conduct this test by heating a sample of solder, contained in a clear beaker,
Electronics Forum | Mon Feb 16 01:26:30 EST 2004 | Frank
The 575 was based on the 570 machine. The 570 was Juki's first laser centered machine. It can do 0402 and ICs with a pitch of 0.65mm or greater. The 575, was a re-vamped 570 that Zevatech came up with. Juki played no part in the 575. Zevatech ad
Electronics Forum | Tue Feb 17 11:14:03 EST 2004 | remullis
Hi, I have worked with the CS400E's for 10+ years and normally when your having problems optically programming. The light bulbs are either getting dark or the filament is not positioned correctly. To set this, you will need a meter to check across
Electronics Forum | Wed Apr 14 10:58:12 EDT 2004 | heatherc
Aegis software offers an MES system that offers both automated and manual data collection points. All of the data collected is automatically deposited in one central database. This database is then used for generating all of the SPC reports for ana
Electronics Forum | Wed Feb 18 16:38:47 EST 2004 | agp
Dean,Chris,Steven, Thanks for all your inputs. I have met with our smt staff and scheduled an evaluation by early next week based on your suggestions. I'll be happy to relay positive feedback afterwards. To be more detailed, here are our set-ups as
Electronics Forum | Wed Mar 24 11:28:45 EST 2004 | Mika
Hi, Why don't You contact Universal GSM tech specialists on this one? Just pick up the phone and explain Your problem and they will help you: Customer Support Center 1-800-842-9732 or 607-779-5000. There is also tech documents on their web site tha
Electronics Forum | Wed Mar 10 14:05:29 EST 2004 | dougt
The 400E has a computer on the bottom of the cabinet with a a Serial/Keyboard Card installed in it. J1 pins 19/20 are the cutters transmit/receive lines on this card, they go through a transition brd and on to the Cutter/Processor brd on the side do
Electronics Forum | Mon Apr 12 04:56:54 EDT 2004 | qualitel
Hi Eric, Every mounter have a standard count and "release" off the component. The sample and cost saving way is to use the paper (e.g: 4mil,5mil...thick) to measure. Just place on the PCB with supoort base below and release the nozzle step by
