Electronics Forum | Mon Oct 02 17:31:40 EDT 2006 | daxman
ARGGH! I've verified proper airflow, made sure everything is tight and secure, cleaned and lubricated the bearings and nothing seems to help. first few boards are nice...then the next few are really bad..then they kinda get good again. I have no ide
Electronics Forum | Fri Sep 22 15:35:14 EDT 2006 | lheiss
Hello all, Finally ready to run my first 14 up array and the machine picks up the part moves to the placement location, them moves to home and drops the part. The Z axis never moves. I do get a "run error 1" at about the 4th placement (if it was a
Electronics Forum | Mon Sep 25 14:32:08 EDT 2006 | johnw
Hi Guys looking for some help from you clever dudes,Firstly I am having dificulty convinicing operations that they cant produce more boards than the line is already producing, what I am basing my cycle time on is the following, the longest cycle time
Electronics Forum | Fri Sep 29 07:12:20 EDT 2006 | OZGURV
Hi Guys looking for some help from you clever > dudes,Firstly I am having dificulty convinicing > operations that they cant produce more boards > than the line is already producing, what I am > basing my cycle time on is the following, the > lon
Electronics Forum | Tue Oct 03 14:14:06 EDT 2006 | slthomas
What is the likelihood that we'll be able to manually dispense paste on 25 mil pitch, 20 mil pads and get away without bridges? We have a CTS Series 753 resnet we need to place and the build qty (30) and board layout (.5" x 1.2" unpanelized, 2-sided)
Electronics Forum | Tue Oct 03 22:10:42 EDT 2006 | jonatf
Hi guys, Our vapour phase oven is taking too long to heat up about 15 mins/cycle. Normally its 5 to 6 mins. 2 reasons why. 1.using 10 amp power board 2.heating element not working properly. before i set up a 15 amp outlet i want to know first if my
Electronics Forum | Thu Oct 05 20:48:06 EDT 2006 | darby
We run Dek ELAs and MPM UP1500, Everyone here prefers the Deks. Set up, software, maintenance, operation etc. There's not a lot in it - the guys just prefer the Deks. However we are an OEM and so get control on board design, finish, fiducials etc. So
Electronics Forum | Thu Oct 05 23:44:55 EDT 2006 | zoltans
Hi, Has anyone got first hand experience with the JT wave soldering machines, WS series? I use a low solid VOC free flux and it seems I have problems atomizing the flux properly and this generates soldering defects, leaving lumps and big solder bal
Electronics Forum | Fri Oct 06 13:04:31 EDT 2006 | cw
hi All, Anyone use snap on type EMI sheilding before? I would like to provide a DFM to a customer who currently have a EMI shield soldered on the boards, which i found this not quite manufacturing friendly as it block the view for inspection, plus re
Electronics Forum | Mon Oct 09 10:00:15 EDT 2006 | C.K. the Flip
I had a customer like this too. Originally, the customer print called for manual soldering of the RF shield (which took us about 20 min. per shield to hand solder), but I changed it to Solder Reflow (I cut apertures on the stencil), with brass weigh