Electronics Forum | Thu Oct 21 10:50:27 EDT 2010 | methos1979
I had a benchtop Yestech demo until for a couple weeks. It was a very good machine. I particularly liked the RGB light system which gave a good visual representation of solder fillets. There was software that allowed you to evaluate based on the p
Electronics Forum | Fri Oct 22 18:57:25 EDT 2010 | jry74
I am having a horrible time with the square radial lead capacitors (thru hole components) and the part coating flowing into the solder joint. These are Class 3 products. When we run them through the wave solder machine, the solder travels up the le
Electronics Forum | Thu Oct 28 11:50:11 EDT 2010 | phase1
We are having a little trouble with what appears to be a crystalization between our fine pitch parts. The problem appears after a a thourough wash of the pcb when dry. It looks like lead wiskers/haze between the joints.We are using water soluable lea
Electronics Forum | Mon Jan 10 18:08:29 EST 2011 | eadthem
vpblf I actually installed the Uniserver (apache mysql php) WAMP on the AOI machine and there is a setting to make it generate HTML board results, cant remember where off the top of my head. anyhow anyone in the inspection area can now open firefo
Electronics Forum | Tue Nov 09 04:21:11 EST 2010 | bising
Hi SMT World, I am facing a technical challenge related to an SOIC 14lds with thermal pad on it's belly that needs to be soldered onto PCB, together with leads. It is a 50 per board, expected 80% solder load on every one. We have some units without
Electronics Forum | Fri Dec 17 10:42:58 EST 2010 | hegemon
I believe there is a lot pertinent information in the thread that Dave forwarded... But (IMHO)I think you can look at two things first. First, is your wave solder process friendly to this large PCB, is there enough pre-heat in the board before it h
Electronics Forum | Mon Dec 20 22:41:42 EST 2010 | grantp
Hi, We had it for a while, but had to take it out and replace it with normal convection. I mean the soldering quality is absolutely amazing, and the joints looked perfect, however it was a horror for tomb-stoning. We tried all types of stencil apert
Electronics Forum | Wed Dec 15 15:07:41 EST 2010 | remullis
I have used Unicam software to create visual workaid documentation along with a setup sheet showing BOM in relation to feeder setups, etc. This was used in 1st piece verification, but also in the early days I had to do a 2 person validation. One and
Electronics Forum | Wed Jan 05 21:25:15 EST 2011 | jeffr
Error 215 is due to corrupt memory. I suggest that you start by replacing the Lithium battery on the Mother Board. Next, remove the cable from the Floppy unit and turn on the machine with it disconnected. Goto the SYSTEM menu and find the menu "DATA
Electronics Forum | Thu Jan 13 19:23:05 EST 2011 | bandjwet
We have a customer whom we have built boards for. They want a "cleaner no clean look". The process uses a no clean Kester 256 SN63 solder paste. After reflow the "residue" noted by the client is too much. We have tried a few things. We are a small