Electronics Forum | Wed May 16 14:48:07 EDT 2007 | jdumont
We got a good deal on ours for around $100K new with not many options. For what its worth I visited Novastar's factory in Pa and was not happy with what I saw there. There were almost no static precautions taken, boards were stacked in cardboard boxe
Electronics Forum | Fri May 25 13:38:15 EDT 2007 | mfgengr
TAL Too Long - dull solder joints, dewetting. TAL Too Short - cold solder, insufficient wetting. You want TAL to be as short as possible (but not lower than 30 seconds), but long enough for every solder joint to be above TAL for at least 30 seconds.
Electronics Forum | Wed May 16 11:40:11 EDT 2007 | stepheniii
I test pdb-boards on the mat it ain't work! Wrong > mount of bolts being outputted. is have something > to do witfh the rohas soulder on them? I will take a stab at translating. I test PCBs on a static mat but the test does not work. The output
Electronics Forum | Thu May 24 12:55:19 EDT 2007 | pjc
First off, go with HiE (Hi Efficiency) machines only. UP3K and UP2K have huge differences- board size, speed, options, etc... too many to list really. I would recommend UP2K HiE over UP3K HiE. Its a simpler machine and easier to find on the used m
Electronics Forum | Fri May 25 08:06:19 EDT 2007 | davef
Soldering PTFE boards * Exposure to the high temperatures needed for solder reflow poses no problem of loss of peel strength since the exposure times are relatively short. * There are many different types of PTFE based products that may perform diff
Electronics Forum | Thu May 31 10:52:31 EDT 2007 | patrickbruneel
A solder wire classified as L0 under IPC J-STD-004 means that the flux residues can be left on the board safely, and when you select this type of cored wire the intention is not to clean. You just select a solder wire that gives you an acceptable lev
Electronics Forum | Thu May 31 12:21:14 EDT 2007 | patrickbruneel
Let me give you some good advice You take already plenty of risk going lead-free, DO NOT use halogen containing fluxes in a lead-free no-clean process. Halogens left on the board will convert tin, silver and exposed copper into metal salts over tim
Electronics Forum | Wed May 30 22:09:31 EDT 2007 | jeffreys
I'm trying to find a solution that will clean our PCBAs that will meet the following criteria: 1. Low cost 2. Enable us to clean 25 - 100 PCBAs per day 3. Leave boards clean, including residue removal 4. Preferably environmental friendly 5. should b
Electronics Forum | Mon Jun 25 16:04:50 EDT 2007 | jmelson
Hi Jon, > > Thanks for the dimensions. It is quite > larger than CSM66, so I haven't got chance to buy > 84. You are very "lucky" because you "only" had > to cut a bigger hole for it. My workshop is > "under" the ground, in the cellar,so I had t
Electronics Forum | Thu Jun 14 04:20:26 EDT 2007 | sami
Dear ERhard.Our placer are Universal Genesis machines and the screen printer is DEK Horizon 02i . for Maian board the tact time in the placer is about 14 Sec and the printer is about 22 Sec. Means there is a big waste time . for Front pannel we are u
