Electronics Forum: bowl (Page 1 of 3)

when should call for vibratory bowl feeder?

Electronics Forum | Mon Feb 28 09:49:44 EST 2011 | syjsoc

when should call for vibratory bowl feeder?

BGA,s Storage

Electronics Forum | Tue Nov 13 19:58:28 EST 2001 | davef

No. I have never measured the temperature of the top of a BGA package during wave soldering. Mr. Kelly�s "actual body temperature" of 140-150�C during wave soldering is probably accurate [most of the time]. It�s the utility of this measurement tha

Warming up solder paste at start of days production

Electronics Forum | Thu Jul 22 07:51:47 EDT 2004 | mmjm_1099

All I got to say is a bowl and spoon and mix it up a little before u place it on the stencil. That works fine on our end all the time.

BGA rework

Electronics Forum | Tue Mar 09 20:08:08 EST 2004 | davef

Warping BGA are the usual cause of shorts in the corners and are usually caused by the reflow profile. BGA have a natural tendency to warp due to CTE and package thermal mismatch, as you have seen at rework. The PBGA will go from a bowl shape to an


Electronics Forum | Wed Aug 08 12:20:51 EDT 2012 | swag

We have a Kaeser AS-25 screw compressor with Kaiser air dryer + cylinders. The system has a water catch prior to delivering air to the dryer that automatically "spits" to a drain. It's not fool proof - if the water collector gets overfull, it will

Re: Pick and place from bulk case

Electronics Forum | Tue May 02 13:29:13 EDT 2000 | Stefan Witte

Hallo Erhard, this appears to be a common task for the manufacturer of taping machines. These machines pick from a bowl feeder or from a wafer and place into tape or tray. Check Ismeca, Viking and others. If you are looking into a custom made solutio

Draining a Solder Pot-

Electronics Forum | Thu Oct 06 06:55:02 EDT 2005 | marcusx

We use chrome bowls to drain ours we have done it many times. They work like champ. I have never used the drain spout we just laddle it out. We are using the SN100C here, it is fanatastic. Quite a few process consideration must be made in order to ge

Pin In Paste IPC Guidelines

Electronics Forum | Thu Jan 04 21:48:53 EST 2007 | davef

You mean it's not OK to celebrate Notre Dame loosing its ninth straight bowl game since 1995? * Notre Dame has lost the last 16 games against teams with top 10 rankings. * Fighting Irish haven't beaten a team of real consequence in the last two seaso

Component usage/Reel sizes

Electronics Forum | Mon Feb 15 17:04:44 EST 2021 | spoiltforchoice

Never mind that, your MRP/stock control system should be able to tell you the reels you buy most often. If there's a huge amount of splicing is it worth looking at bulk components and one of those bowl/vibratory feeders? (if only because they are sup

Re: Pick and place from bulk case

Electronics Forum | Tue May 02 01:55:13 EDT 2000 | Erhard Hofmann

You are right, I am looking for a solution to place small components, 0603, 0805, 0402, and similar. The components will be fed by a vibratory feeder and placed onto trays. This is happening in the comp manufacturing stage and the trays are used as a

  1 2 3 Next

bowl searches for Companies, Equipment, Machines, Suppliers & Information

PCB Handling Machine with CE

MSD Dry Cabinets
2023 Eptac IPC Certification Training Schedule

High Resolution Fast Speed Industrial Cameras.
convection smt reflow ovens

High Precision Fluid Dispensers
thru hole soldering and selective soldering needs

High Throughput Reflow Oven
design with ease with Win Source obselete parts and supplies

SMT Machines, Parts & Accessories - Used and New