Electronics Forum | Fri Apr 27 09:05:51 EDT 2018 | dszewczak
prompt) When we came back in the morning it was repeat scrolling an "ODD ADDRESS ERROR" on the monitor. I used a loopback to verify that the serial connections were good all the way to the control box. We tried uploading the main program to the ma
Electronics Forum | Sat Nov 09 19:10:18 EST 2019 | richardcargill
Hi, I just set one of these up a month or so ago, so it's all pretty fresh. The 265s have a pressure sensor amplifier box that needs calibration using the OEM calibration jig. OR you can use a 3 quid digital luggage scale from Ebay. The calibratio
Electronics Forum | Wed Jul 12 13:10:05 EDT 2000 | Dason C
John, currently, I am using the Eureka Dry Box and it is similar to McDry but cheaper and you can try and check www.aiko-group.com Rgds.
Electronics Forum | Thu Jul 13 22:34:04 EDT 2000 | Dave F
Tuan: Interesting. How do you have the compressed air rigged to your storage box? Regulator that's just open?
Electronics Forum | Fri Dec 01 12:02:15 EST 2000 | blnorman
I have over 10 years experience in aerospace materials, part of which was involved with vacuum casting inert propellant formulations. These propellants are in the range of 80 - 90% solids loaded with viscosities of 15 kP. I'm not sure where I could
Electronics Forum | Mon Feb 05 08:07:52 EST 2001 | roland
I searched SMTnet using the top search box with "companies" in the dropdown and got 17 results. Here are a few: Petroferm, who is a SMTnet sponspor, Aqueous Technologies Corporation, Kyzen Corporation, Technical Devices Company, Impell Purification
Electronics Forum | Wed Oct 11 15:52:33 EDT 2000 | John Thorup
Hello TA Please go to the "search" box immediately to the left of the screen, click "companies" for Search Section and enter EMC in the Search Terms. You'll go right to it.
Electronics Forum | Fri Sep 22 06:59:45 EDT 2000 | jackofalltrades
For several years now we have been using a short (4 feet) conveyor with brush wheels and a simple box fan mounted under it (blowing up) to cool the product.
Electronics Forum | Mon Aug 21 10:53:54 EDT 2000 | aflewelling
Thanks for the comments regarding the tool-tip popup box. The popup tips have been disabled. If you have forgotten any of the tips you can review them by clicking on the "Pop-up Tips/Help" link in the left menu.
Electronics Forum | Sat Aug 12 09:29:58 EDT 2000 | Dave F
Barry: We use motion detectors: * In our product packaging to determine if the shipper has drop kicked the box down the stairs. * Along our conveyors in production to sense a "line full" These are far different applications and probably far diffe
