Electronics Forum | Wed Dec 23 12:57:59 EST 2020 | ilavu
Check Power Distribution Panel Power Supply. No output or output too low for 24V, 15V, and 12V. Also, LED's on PDP LT6, LT7, LT8 , LT9, LT10, LT11 don't turn on at all, even though all fuses test OK for continuity.
Electronics Forum | Fri Sep 27 02:01:31 EDT 2019 | dilogic
Did you try "Logicomm" debug procedure? It might give you a hint...
Electronics Forum | Fri Sep 27 14:26:57 EDT 2019 | ttheis
Hi Deni- Thanks for the suggestion I will read up on Logicomm and see what it gets me.
Electronics Forum | Fri Sep 27 22:22:14 EDT 2019 | ttheis
Thanks for the suggestions!
Electronics Forum | Mon Sep 30 10:15:39 EDT 2019 | dilogic
Please report here if (and how) you manage to solve the problem - it might be helpful for all of us in the future!
Electronics Forum | Mon Sep 30 10:51:43 EDT 2019 | ttheis
Yes, if I figure it out I will report back.
Electronics Forum | Wed Nov 13 16:27:40 EST 2019 | ilavu
Tom, Did you put the machine in debug mode? Do you use RAMTF or PTF? Based on your problem, check PilZ box.
Electronics Forum | Mon Feb 01 12:16:13 EST 2021 | rubyjones
Hi there
Electronics Forum | Thu Sep 26 13:55:54 EDT 2019 | ttheis
One of our GSM1 machines occasionally stops running in the middle of a program and I haven't been able to figure out what is causing it. When the issue occurs, the "BM" (bus master) light on the SYS68K card drops out (turns off, no activity) the boa
Electronics Forum | Fri Oct 11 09:49:07 EDT 2019 | ttheis
FYI I did try logicomm but the log files were empty. There must be something wrong with my connections from the force board to the EPC. I'll keep investigating. I also swapped the EPC to see if that makes any difference.
