Electronics Forum | Wed Jul 01 13:41:25 EDT 2009 | jlawson
Are you sure it is the Z axis, and not the > rotation, I had one machine which often did > something similar, it would buzz loudly, > especially if you touched or applied rotation > pressure to the gear belt which rotates the > head. It never ca
Electronics Forum | Tue Mar 16 06:13:58 EDT 2010 | dilogic
Can you tell me how to distinguish between them? I recently bought a second GSM2. With it I've got two FlexJet heads (dismounted). The serial number of both heads starts with FJ7P, so I assume they are of FJ7 type? The issue is - it seems that the he
Electronics Forum | Tue Apr 27 16:42:18 EDT 2010 | m79d
Hi jepoy + a very frazzled man thanks for your suggestions,here is how it went:- I found a couple of these VM1710 boards and tried one and still nothing. I really wanted to see if power was getting to the camera and anything coming out. I was loo
Electronics Forum | Wed Jan 05 21:25:15 EST 2011 | jeffr
Error 215 is due to corrupt memory. I suggest that you start by replacing the Lithium battery on the Mother Board. Next, remove the cable from the Floppy unit and turn on the machine with it disconnected. Goto the SYSTEM menu and find the menu "DATA
Electronics Forum | Wed Nov 09 05:12:43 EST 2011 | bobpan
Motor error 4 is an error that is caused by the machine not reaching a position in a timely matter. Usually its in the x/y axis but also could be z. If you have cleared the mod codes (function 35 shift 7) the machine should home. Usually this problem
Electronics Forum | Tue Nov 13 12:02:54 EST 2012 | jaimebc
I'll try swaping cards and see if the problem follows the card. So far, my guess would be the motor going bad. I did change the brushes, X wagon cables and every cable that goes to the midas unit. But that didn't fix it. The problem is that to replac
Electronics Forum | Wed Sep 05 06:34:08 EDT 2018 | oriolsancheza
Hi Rob, Thanks for your fast response. In fact, after a better look to driver boards, it has leaking SMD Electrolityc caps. Unfortunately after replacing them in 3 units, one of them gives 90% of times, ALARM4 led ON. Looks like a comunication pro
Electronics Forum | Thu May 02 13:40:25 EDT 2019 | youngbuck
Hello All, I am having a issue with Siplace 80 F5 with parts placing of in the X direction after I do Zero Point Correction with tool and Full Calibration. I also do the Gantry Zero Point correction and parts still place off in the X about .200mm to
Electronics Forum | Sat Jun 22 07:38:58 EDT 2019 | emanuel
We have a printer with Hawkeye 1700. The PCB side sometimes returns a distorted picture. It happens erratically, can be at startup or after a while, sometimes the machine works full day without problems. The only way to restore operation is disconnec
Electronics Forum | Wed Aug 18 13:48:12 EDT 2021 | rgduval
It's been awhile, but, some other things you might look at: - Check the fiducials on the toolbox. If they're getting obscured/damaged, all kinds of weird things can happen. I had problems initializing tools one time because of this, and I could actu