Electronics Forum | Thu Jun 01 21:43:43 EDT 2000 | Dave F
Hey Ashok: On your questions ... 1 If you measure those things, then you should be recording your efforts. Think of that stuff as calibratable equipment. 2 Use the covers My2�
Electronics Forum | Mon Jan 12 15:03:43 EST 2004 | davef
We read what you wrote, but were unclear on what you were asking. Like: What's a feeder maintenance footprint? We don't consider feeders to be tools. Each is a calibratable machine with seperate maintenance and calibration schedules.
Electronics Forum | Fri Aug 03 07:23:09 EDT 2001 | davef
Why not use the same calibration tracking, recording, and problem resolution system that you use for other calibratable production equipment, like meters, scopes, and programable controllers? If you have a reasonable quality system, then the tools y
Electronics Forum | Mon Feb 06 19:56:07 EST 2006 | bobpan
Ok....that is very vague...but here is the approach i would take. 1. rename permanen.tbl file and reboot 2. rename calibrat.arc file and reboot * both files are located in c:\2kla\gui\guiqsv1* If it fixes the problem....it was a software issue. 3. If
Electronics Forum | Wed Jan 23 11:28:47 EST 2008 | tbkonrad
Help! Since last Friday i have been having issues with a Quad qsv-1, it all started with a quad align error, i found there to be a small quantity of grease covering the lenses on both quad align sensors. I wiped the grease off and then everything s
Electronics Forum | Fri Jun 25 12:01:49 EDT 1999 | Earl Moon
Dear John/Earl Thanks for your clarifications. To me also the problem does not seem to be linked with the PCB. The Pre heater temp. is set at 450 degree C. We are using Alpha Aq. cleanable flux. Can you elaborate on the Desired
Electronics Forum | Fri Jun 25 16:54:25 EDT 1999 | C.K.
Dear John/Earl Thanks for your clarifications. To me also the problem does not seem to be linked with the PCB. The Pre heater temp. is set at 450 degree C. We are using Alpha Aq. cleanable flux. Can you elaborate on the