Electronics Forum: camalot 1818 (Page 1 of 4)

camalot 1818 vision initialization issue

Electronics Forum | Tue Dec 21 09:22:52 EST 2010 | cwhite30

I have a camalot 1818 dispensing system, but it recently stopped booting up. It gets to the 197 vision initialization screen and then freezes with the message "bad command or file name could not communicate with vp" Does anyone know how to fix this?

camalot 1818 vision initialization issue

Electronics Forum | Mon Jan 03 14:38:42 EST 2011 | leemeyer

I had this problem awhile back and it turned out to be a problem with the computer Bios settings. The battery had gone dead and the settings were set back to the default state. Luckily I have 2 of these machines and was able to reset the Bios configu

camalot 1818 vision initialization issue

Electronics Forum | Wed Jan 05 14:53:59 EST 2011 | cwhite30

I got it working. The computer backup battery did indeed die. I obtained the bios settings from the manufacturer. Thanks


Electronics Forum | Wed Aug 05 09:22:17 EDT 2009 | leemeyer

Speedline Technologies: http://www.speedlinetech.com/camalot/index.aspx Let me know if they can help you or not

Camalot 1818

Electronics Forum | Wed Jul 30 13:18:07 EDT 2008 | leemeyer

Ours are 1996 models. No special hoses needed, just attach the air hose and your ready to run.


Electronics Forum | Tue Aug 04 15:53:27 EDT 2009 | emanuel

Maybe it will sound a little obsolete, but I need to know if there is or where to get a software package to be used with a CAM/ALOT dispenser for solder paste. Is there a dedicated program or any kind of gerber translator out there?

Camalot 1818

Electronics Forum | Wed Jul 30 11:13:58 EDT 2008 | leemeyer

We have 3 1818's running in our shop. The only hookups we have are air regulated to 85psi, vacuum and power. The machine will not power up with air less than 40 psi.

Camalot 1818

Electronics Forum | Wed Jul 30 11:33:35 EDT 2008 | adamcrum

Could you if possible email a few pictures of how the steel airlines are hooked up? This is the older models you have correct? Circa 93/94? My email address is ACrum@eetechinc.com

Camalot 1818

Electronics Forum | Wed Jul 30 10:56:33 EDT 2008 | adamcrum

Hiyo! My company just recieved a Camalot 1818 from a another company that we are now building boards for to speed up production for their stuff. As some of you may know, the older versions of this model AREN'T supported by speedline. I made a grown m


Electronics Forum | Fri Aug 07 02:18:52 EDT 2009 | emanuel

I sent them a couple of emails a while ago. Both were replied with an automatic answer saying they will reply soon. The 1818 is not on the list of supported models, according to their announcement from Sept.2007, the 1818 is replaced by the FX/D. I

  1 2 3 4 Next

camalot 1818 searches for Companies, Equipment, Machines, Suppliers & Information

SMT & Related Equipment - Delta Tau Data Systems Inc.

Component Placement 101 Training Course
Blackfox IPC Training & Certification

High Precision Fluid Dispensers
2023 Eptac IPC Certification Training Schedule

Smt Feeder repair service centers in Europe, North, South America