Electronics Forum | Fri Mar 01 10:45:54 EST 2013 | jaimebc
We currently have a problem with our Universal GSM 2. A part ins presented to the front or back camera but there is no image of the component. Just a dark screen, even though the light system is working. Any ideas on what the problem may be? I suspec
Electronics Forum | Sun Sep 15 04:45:22 EDT 2013 | jandon
Cleaning and lubrication requires maintenance training. You can really break something if you don't know what you are doing. For example you can break your expensive rubber nozzles or cameras with inappropriate cleaning. Check: - Piping and joint -
Electronics Forum | Fri Aug 28 11:59:05 EDT 2015 | gascon5383
Actually I should have noted we resolved this issue. After chasing our tails for a while, we found that somehow there was a static charge on the boards going into the machine. This static was discharging to the camera through the board stop, causing
Electronics Forum | Tue Feb 24 03:36:37 EST 2015 | jlawson
Also should look at Viscom 3088Flex Ultra if after AOI with 3D capability. The camera optics module has many innovative features, super fast data capture - much faster then Mirtek and KohYoung. Both these companies have taken 3DSPI and turned into AO
Electronics Forum | Thu Feb 19 12:22:52 EST 2015 | dman97
Hi there. I have an IP3 machine that refuses to power up the MFU cart on side 1. I have already replaced the I/O card but still no dice. Is there a relay or fuse that I need to check to get this to power up? The machine will not operate the camera
Electronics Forum | Thu Aug 13 14:52:42 EDT 2015 | deanott
We just encountered a problem with the vision on our MPM Accuflex. We just switched jobs and when we went through a 'Vision Set-up' there was no image (just blank gray screen where you'd normally see the PCB or bottom of stencil). When we tried to
Electronics Forum | Fri Apr 01 17:24:08 EDT 2016 | jlawson
Yes VISCOM uses Cyberoptiocs for SPI as they have a great optic head, but VISCOMS Ultra 2D/2.5D/3D head is best in market, I would say much better than Cyberoptics from a technical specification perspective. Has heighest part 3D height image renderin
Electronics Forum | Tue Feb 02 17:00:50 EST 2016 | warwolf
Hello, We are currently having a problem with the output of the cameras in our SM421, the fault we are seeing is a flickering across only the 6 flycam cameras (this is causing SM vision to not correctly reference the parts) We have tried: Swapping t
Electronics Forum | Tue Aug 30 07:44:39 EDT 2016 | ariss_t
Very good explanation.. yep.. after 4 set of vision cable and a new usb3 port, the problem solve.. seems like the purple cable were the root cause .. The 1st cable on marginal pass failed but not shown the "camera 0" error and we still can poll the
Electronics Forum | Sat Feb 10 10:08:04 EST 2018 | griinder
We recently acquired used MPM Accuflex. Immediately I noticed the live vision is mirrored. This makes it incredibly difficult to teach fiducials. I noticed some smudges on the lens, which leads me to believe the camera assembly was "worked on" at som
