Electronics Forum: camera (Page 86 of 128)

0201

Electronics Forum | Wed Feb 27 04:23:13 EST 2008 | fujillews

Hi It is best to fit the VGA camera for 0201 parts make sure your software is high enough..above v1.33 although you can place without but no so good. 0.4mm tapered nozzles are best. 0201 feeder the locator base in increased by aprox 0.3mm and the ind

THT manual assembly worker instructions

Electronics Forum | Mon Feb 25 11:33:49 EST 2008 | ck_the_flip

Poor reading skills......that being said, with good resolution (3 megapixel and up) digital cameras so readily available, and cheap, why not use real pictures? After all, a picture's worth a thousand words... In the '90s, I used to translate CAD/Ge

Dek Horizon 03i

Electronics Forum | Fri Feb 29 16:42:34 EST 2008 | vikkaraja

Hello again, Has anyone experience any problem with their vision system on the DEK machine. Machine had been running fine for at least one year without any major problem until this week. Machine's response is very slow especially the vision system. M

Fuji CP6 Y-axis placement problem

Electronics Forum | Thu Mar 20 07:58:12 EDT 2008 | cyber_wolf

#1Run a Fuji gold board and see if the problem persist. Is your board clamp slipping? Fid camera tight? etc.. To see if you have a Y axis positioning problem: 1.Put the machine in mecha check 2.Go into Y-axis 3.Place a dial indicator so that the st

DEK print problem?

Electronics Forum | Mon Mar 24 14:19:36 EDT 2008 | burb1999

I have a DEK ELA and here is what happens. I print a board after going through the step and it is a dead on print. Then, with another print it will be off in Auto mode (sometimes up and sometimes down, seems to just be up and down not left to right

Board Fiducials

Electronics Forum | Thu Jun 05 21:59:22 EDT 2008 | mika

bsumfg, The very best anybody said lately!! This should go straight into the the manual! I totally agree with you; Just an add: The fid's should never be mistaken for a test point who normally is between 1.0 - 1.27 mm so make the fids 1.5 mm. round

CP6-4000 maintenance manuals?

Electronics Forum | Tue Jun 03 12:39:53 EDT 2008 | rodrigo

Hi all, Does anyone know where to get maintenance manuals for this machine? We have a CP4 and a CP6. The CP4 has something called Level II maint. manual that is great. But we do not have something like that for the CP6. I tried to call Fuji but ... I

ive solder profiles

Electronics Forum | Mon Aug 04 16:28:49 EDT 2008 | grics

Hey Patrick, thanks. The area that is dark (half circle) is where the camera was. It is the same color as the above. But you may be correct still. I also noticed that the majority of the solder balls were along the "Dark" blue depression around the

Landrex Optima II AOI

Electronics Forum | Sun Oct 26 09:24:17 EDT 2008 | tony_d

Hello Reese, You may want to check out MIRTEC's MV-7 machine. It is simple to use, like your YESTech M1 (we looked at YESTech before selecting MIRTEC). But unlike the M1, the MIRTEC MV-7 has five 2 meg cameras, and a laser inspection option as wel

Fuji IP2 users

Electronics Forum | Fri Nov 21 06:00:56 EST 2008 | ralphspm

Our Fuji IP2 m/c will not recognise fiducial marks. M/c lost all proper data and without any backup documentation on what data was originally inputted I have had to use educated guesswork. Is there info that needs to be in the proper data for the IP2


camera searches for Companies, Equipment, Machines, Suppliers & Information