Electronics Forum | Tue Aug 28 11:08:42 EDT 2007 | dphilbrick
Dedicated fixtures are always better, assuming you use a good manufacturer. If your a CM you will always have a battle convincing customers to pay for dedicated fixtures unless you have a detailed cost structure that can show them how they will save
Electronics Forum | Wed Aug 29 00:13:24 EDT 2007 | slthomas
The two factories I've worked at that ran Radial Lead inserter/sequencers were both building their own products and we were able to specify our own panelization guidelines. One-half inch rectangular frame on all boards. Our universal workboard hold
Electronics Forum | Thu Sep 06 11:56:24 EDT 2007 | gmoritz
> x/y position of that lead does > > not change as the head rotates." > Heh-heh. You'd think so, wouldn't you? > Have you observed this with a magnifying glass? Heh-heh yourself. I (think) I know better than to think that it would withstand tha
Electronics Forum | Tue Sep 04 10:48:49 EDT 2007 | lloyd
How do other people check their solder joint strength after a process change? For example, say you are getting wetting problems and you feel that a change to the reflow profile may help, or perhaps a slight change to the stencil aperture to reduce so
Electronics Forum | Wed Sep 05 10:59:02 EDT 2007 | slthomas
What's sad is, it really happened. I won't bore you with the details again. ;) Lloyd, I would love to have a nice Hi Scope too (I think Cchunks works for one of those big champagne and caviar corporate entities ;)) but if you can't swing it, at leas
Electronics Forum | Thu Sep 06 15:36:27 EDT 2007 | kpm135
My company recently aquired an asymtek coating machine and I have been using Humiseal 1B31, an acrylic coating, in it to coat all the boards given to me. They have now come to me and asked if it is possible to run Humiseal 1A33, a urethane coating, t
Electronics Forum | Mon Oct 01 11:57:34 EDT 2007 | kpm135
I've never worked with a MPM printer but I had something similar happen on a DEK printer. The problem was that screens were manually centered in the machine and the operators were not careful enough when setting it up so the settings were very close
Electronics Forum | Tue Sep 18 16:30:29 EDT 2007 | slthomas
I think Darron drove that DHVCD off'n a tall cliff. There's a whole bunch of stuff that could cause no-cuts, but without more information (dings on leads, full insertion, dry-run performance, continuity checking results) we'd all be (and have been)
Electronics Forum | Sat Sep 22 02:14:08 EDT 2007 | mika
Another thing to make sure of and the vision calibration system will fail if this is out of range: Use a magnet foot stand micrometer and measure the spindle run outs. First remove the nozzles and nozzle adapters, then put the adjustable tip (I dont
Electronics Forum | Fri Oct 12 14:53:56 EDT 2007 | mika
Hussman, I'm sorry that I was a little bit tired and on top of that not so sensitive to your humour. Not so easy to understand everything for us Swedish guys. We have normally a great sense of humour over here and almost daily we have a big laughs a