Electronics Forum | Wed Mar 22 11:49:16 EST 2000 | Chris May
Can anyone recommend a solderability test kit. This would be used for SOT23, chip caps resistors etc; Thanks in advance, Chris
Electronics Forum | Wed Mar 29 23:16:26 EST 2000 | cklau
Hello there; Please pls try & contact the graphicode company and ask for GC-place demonstration program Disk. Using this program U can generate the XY centroids using Centroids Data extraction command . Hope this help.
Electronics Forum | Sat Mar 18 07:43:25 EST 2000 | Dave F
Larry: I'd like to see your angle increased generally and that could fix your problem. Lots of other things can cause skips, such as: * Wave height, your might be high with 2" of contact * Flux contamination, activity * Component contamination * C
Electronics Forum | Wed Mar 22 12:53:43 EST 2000 | David Spilker
Be careful if you use Ni/Au. The "black pad" phenomenum can be crippling. We moved from Ni/Au to OSP because of it. I also don't want to return to the lack of flatness of HASL.
Electronics Forum | Mon Mar 13 08:59:21 EST 2000 | Jeff
Jeff, We do not use push up pin. The nozzle pick-up and placement heights are checked many times. We are looking for wich component can break the nozzles. Thanks for your help, Jeff.
Electronics Forum | Tue Mar 07 21:19:50 EST 2000 | Van Hoang Dinh
I have few problems below, 1.I had problem with clean glue stencil at the midle of the process and after the process. 2.Very hard to Fix the bridging on the (close pin) connectors through the wave. Anyone can help on this. Thanks Van
Electronics Forum | Tue Mar 07 13:07:12 EST 2000 | JAX
Mark, You should be able to get whoever builds your wavesolder pallets to create some you can also use in SMT. The only difference is you might have to change pallet materials to reduce the weight. That's just my opinion, I could be wrong
Electronics Forum | Wed Mar 08 12:50:21 EST 2000 | Scott K
For the Transition Automation pallets that Chris mentioned, they can be contacted at www.boardlok.com, or 1-800-648-3338. "SMT pallets", as compared to those specific to just wave solder, are becoming increasingly popular. Good Luck
Electronics Forum | Wed Jul 12 13:10:05 EDT 2000 | Dason C
John, currently, I am using the Eureka Dry Box and it is similar to McDry but cheaper and you can try and check www.aiko-group.com Rgds.
Electronics Forum | Fri Mar 03 13:41:43 EST 2000 | pr
Is it o.k. to clean my glue stencils in the same IPA stencil cleaner I use for solder paste? Also if anyone with experience in stenciling glue can lead me away from first time pitfalls I would appreciate that as well. thanks in advance
