Electronics Forum | Fri Sep 05 03:05:55 EDT 2014 | philc
Hi Brett, I'd suggest emailing AVX directly - gib@avxcorp.com Website at http://www.avx.com They may be able to help identify the component. The M is probably nothing to do with the part, maybe just a production number. Looks like a radial tant tho
Electronics Forum | Tue Nov 11 21:21:54 EST 2014 | sonavc
Thank you, that is help, I always change in program and re-transmit. One more question, I program N_data with capacitor is TANTB (using M nozzles in part data). but when I run the program in machine it is always use S nozzles to pick the cap. TANTB
Electronics Forum | Tue May 05 11:12:01 EDT 2015 | anirudh_thabjul
Thankyou once again dude. Please Don't mind it. I have one more doubt regarding the Max.Power Rating of SMD Resistor. ---"Is same principle which you told application for Maximum Power rating Of SMD Resistor also"?--- i.e Higher Powerrating is
Electronics Forum | Sat May 09 09:10:19 EDT 2015 | sarason
Might I add, avoid Y5V if you want a reliable design and Marc is correct do look at those charts for X7R voltage dip under load, if you are doing low volume, save yourself the trouble and time, just overrate. sarason
Electronics Forum | Sat May 09 09:12:53 EDT 2015 | sarason
Might I add, avoid Y5V if you want a reliable design and Marc is correct do look at those charts for X7R voltage dip under load, if you are doing low volume, save yourself the trouble and time, just overrate. sarason
Electronics Forum | Fri Dec 02 01:49:48 EST 2016 | jeya7376
I want to do improvement in conversion time. We running small quantity board and frequently do conversion. we produce very simple board no BGA only resistor, capacitor, LED, IC and transistor. We are running same model top and bottom in 1 reflow oven
Electronics Forum | Thu Apr 20 02:44:39 EDT 2017 | tsvetan
The hole is too big, you should reduce the size in the next PCB revision. The middle joint is soldered at low temperature you can see how the solder didn't distributed evently and cooled on waves. The solder joint at the bottom didn't wet the capac
Electronics Forum | Tue May 02 15:25:22 EDT 2017 | mrk
Hi, We have recently been tasked with producing a PCB assembly that requires a chip resistor to be stacked on top of a chip capacitor (both are 0603 package size). This becoming a more common practice, I was wondering if anyone has been successful i
Electronics Forum | Mon Jun 05 12:30:24 EDT 2017 | deanm
Mike, The dispensable solder paste is ordered separately from the printed paste because it has a higher flux content. I would not feel comfortable mixing liquid flux into the printable paste. Ask your paste vendor if they have a dispensable version.
Electronics Forum | Thu Jun 22 07:30:25 EDT 2017 | stephendo
Any possibility of having some changes made to the PCB for future runs? Can the ground connections be modified to have thermal relief patterns? At one time occasionally people would come to me to tell me that the power was out at their work station