Electronics Forum | Tue Jul 22 20:47:21 EDT 2008 | davef
Q1. Can I do this myself on site? A1. Sure. Most companies demoisturate their components in-house. Q2. Can we use our Vitronics Soltec XPM820 Reflow Oven? A2. You can. Most of us would be using an oven like that in our product processing. If you look
Electronics Forum | Fri Sep 12 04:21:54 EDT 2008 | gsala
Had same problem with SOT23 (two different PNs and Suplliers) problem was random (AVG 0,15%). Parts are RoHS but soldered by SnPb, Lead frame Plating (e3)according to IPC-J-STD609 it means Sn pure (check the label on reel), additional info, it is S
Electronics Forum | Fri Oct 03 10:24:17 EDT 2008 | chineechooze
I have a problem with placement repeatability and accuracy on this Samtec connector. The customer wants to use a "nubbed connector" which has to be placed in the corresponding PCB holes. When the nubs miss the holes, the part becomes "lifted." SEE
Electronics Forum | Tue Oct 07 16:19:34 EDT 2008 | mikesewell
If at all possible buy parts with 3% min. lead on the terminations. If this is not an option, "mitigate" whatever the finish is. Typically this means tinning with 63/37 all the exposed lead, not just the solder joint area. Several companies can d
Electronics Forum | Fri Nov 21 16:48:05 EST 2008 | kennyg
Anyone have an 'easy' solution for reducing PCBA handling damage. I'm fighting low level chipped, scuffed and broken-off SMT parts. The damage is spread out across different areas of the assemblies. The assemblies are double sided SMT with 0402's
Electronics Forum | Fri Jan 16 16:36:37 EST 2009 | rwyman
We've used our standard chipbonder- Heraeus PD944- for this type of application. While it does cure before reflow, when the part is placed onto the site, the material compresses and spreads and thus that potential standoff isn't an issue. We've als
Electronics Forum | Fri Mar 19 09:00:18 EDT 2010 | jorge_quijano
Just a comment, we have been using the OEE as metric in our plant, what I've seen is that can be misunderstood because a good OEE level does not mean a good machine utilization, let me try to explain this on my own words. I have a HMLV line, so when
Electronics Forum | Thu May 20 09:47:25 EDT 2010 | pforister
Is this a single head Quad IVc or a dual headed line? if it is a dual line you can swap the align cards in the front bay between the two heads and see if the symptom follows. The card on the far right is a transport card, shouldn't need to swap tha
Electronics Forum | Mon May 03 16:39:44 EDT 2010 | jlawson
Thanks Larry We are loooking a bigger Vapor > machine which could soldered our big size > borad(600x600 mm)assembled with hundreds of > sockets and thousands of components. How about > IBL products? Anyone used before? You should also look at
Electronics Forum | Fri Jun 18 17:36:10 EDT 2010 | sid
Good afternoon all, I have been trying to find a solution to a defect I just noticed. After stencil printing and smt part placement on the secondary side of my boards, I run them through a wave soldering system. All my components got soldered perfe