Electronics Forum | Tue Aug 17 11:31:39 EDT 2004 | Cal
Hello All- I need to replace my Foam flux aerator in my wave soldering machine and need a source. The "Stone" Size is 38x25mm @ 3um. If any one has a source thanks in advance. OBTW- this wave not a "Name Brand" machine (i.e. Eltrovert). Cal
Electronics Forum | Tue Aug 17 11:44:19 EDT 2004 | rlackey
Hi, does anyone have any real experience in using the following AOI systems (including opinions on support)? Cyberoptics Flex Agilent SJ50 MVP Supra Landrex Optima (Teradyne) Please fight the urge to pass comment or point out the error of my ways i
Electronics Forum | Tue Aug 24 04:35:33 EDT 2004 | rlackey
Hi Mike, Thanks for the comments. We are upgrading our post reflow inspection - primarily solder joint inspection, and capable of keeping up with a maximum of 80K components an hour. Solder paste inspection is currently carried out by our prin
Electronics Forum | Tue Aug 17 13:24:47 EDT 2004 | blnorman
We have parts that have electroplated tin over nickel. The mfg. assures us the minimum thickness of the tin is 5 microns. Cross sections have shown many instances of 1 micron and pits that go down to the nickel barrier layer. A request for thicker
Electronics Forum | Thu Aug 19 16:50:39 EDT 2004 | davef
The best way to reduce change-over time is to: * Buy lots of feeders * Limit the number of part numbers available to design engineers * Bar code feeders to help verify proper machine setup We know of no such software. There IS software that recomme
Electronics Forum | Thu Jan 05 15:34:55 EST 2006 | Joe Wesley
Electrovert does not seem to be cheaper. Still about 30K more than the Delta. We are investigating too, we are concerned about the dross build up and flow design in the electrovert. The Soltec Machine seems to have less of an issue and maintenance ap
Electronics Forum | Tue Jan 10 14:56:11 EST 2006 | greg york
Worked with Soltec 6622 with Leaded and Lead Free and is a very capable machine with some good knowledgable engineers to back it all up. Not seen a Nousstar yet in the UK nor a Lead Free Electrovert either thinking about it Greg York Technical Sales
Electronics Forum | Wed Aug 18 14:08:12 EDT 2004 | Claude_Couture
I guess you want to try a permanent feeder setup. This is possible if the total number of feeders needed to cover all of the different products can be installed on your machines. Then just use the same setup data for all your product. Each program wi
Electronics Forum | Tue Aug 24 00:37:49 EDT 2004 | Justanobody
Look into the Multi-Job Line Balancer. You select a group of products that you want to run and WHAM-Oh! A setup sheet is created that tells you what you need to move once you run out of room or a part number is no longer needed. Contact Fuji America
Electronics Forum | Tue Nov 23 16:38:12 EST 2004 | rodionp
I will let you use our software for free before it goes retail (planned for january - february 2005), if pricing is a concern for you. We do feeder setup optimization as well as assembly sequence optimization (however we don't do line balancing).
.gif)
