Electronics Forum | Tue Feb 16 09:37:05 EST 2010 | davemacnemo
Stumbled around in the data management section for a while and found that the board origin somehow got its sign changed from -ve X value to +ve :o/ - Is there any way to change the colors on the display. Someone has made some really bad choices (blac
Electronics Forum | Tue Feb 09 16:31:37 EST 2010 | jax
Basically it states that you cannot have Field Returns in the same area as Work In Process. You must have a way to clearly identify and seperate the two different types of product... In your ERP/MRP/ShopFloor/etc... as well as physically. The preferr
Electronics Forum | Fri Feb 12 05:53:32 EST 2010 | muarty
Hi Flipit, One of our customers has recently changed to this type of finish on their PCB's, due to them wire bonding MMIC devices in their factory after we do the SMT build. We found that we had to change all of our stencils for these products, as t
Electronics Forum | Wed Feb 10 22:32:22 EST 2010 | davef
"Because of the rapid curing features of this product, large amounts of heat are generated when large masses of material are mixed at one time."[ITW Plexus MA310 TDS] Questions are: * Have you looked at the exotherm curve for this stuff? * Can the c
Electronics Forum | Thu Feb 11 12:02:47 EST 2010 | plaiming
We have temporarily switched to an RTV for the vibration reincforcement, but it is not compatible with acrylic conformal coating and we really do not want to switch conformal coatings to a silicone based. Additionally we are testing the product in h
Electronics Forum | Thu Feb 11 15:51:22 EST 2010 | baildl632
Universal Sequencer, VCD, Radial, or Unimod(DIP installer) machines! We only still have and run our Universal/Berg pinning machine. I can't say they will work any better than humans do as humans will have to run and maintain them though. We did get g
Electronics Forum | Wed Feb 17 22:56:29 EST 2010 | fulldrawmike
we have aprox 41 HSC heads on our production floor. We have had very few issues with a head being down. What have you had going on with it? As for maintenance, there is very little on the head, spindles though need some pm quite often. Let me know
Electronics Forum | Tue Feb 16 07:59:36 EST 2010 | peterpan1709
Would anyone have software for a Mascot 32 PCB Assembly Workstation? A new hard disk has been reinstalled and I have the original dongle but I don't have the software CD. I need Version 1.29 if possible? Or any similar version?
Electronics Forum | Tue Feb 16 08:47:38 EST 2010 | jdengler
We powered up our CP-IV today and got an error. About 7 seconds after power on page 000 comes up with nothing in any of the areas except for second status area which contains "LD INIT" in yellow. After about 16 seconds the second display area gets
Electronics Forum | Tue Feb 23 10:33:40 EST 2010 | andrzej
To prevent cracking SMD components near the edge of PCB you should use guillotine for V-cut groove. Other solution is redesign panel of PCBs and in critical areas you should mill along the outline instead of V-cut, but if you choose this way probabl