Electronics Forum | Thu Aug 18 09:46:40 EDT 2016 | jbuckley
Put anything over one of the fiducials being used in the circuit, and run the board. It will stop, and on the top right a window will pop up. Click "Skip Current Module" and it will X-out that circuit. If you are using the fiducials on the rail, rath
Electronics Forum | Wed Aug 17 06:30:50 EDT 2016 | thaneshsivanadian
Hi Guys, i have some doubt, may i know how to calculate the PCBA warpage after complete of SMT and through hole process? Do we have any calculation for that? And What is the acceptance level of warpage after complete assembly? Thanks, Thanesh
Electronics Forum | Thu Aug 18 02:39:21 EDT 2016 | epsltd
We have a Mirae 1030 and when the machine warms up the y-axis fails and we are unable to reset servos unless we leave machine powered down few hours. Now since we have changed servos after machine homes we jog the y-axis and it vibrates and very nois
Electronics Forum | Tue Aug 23 18:12:15 EDT 2016 | jasltd
Hi Folks, I'm looking for suggestions for a label applicator to go in line with our SMT equipment to place both 2d & std bar code labels onto panels. The equipment needs to be easy to set up and flexible as we are a CEM so have a range of products i
Electronics Forum | Wed Aug 24 22:02:44 EDT 2016 | davef
Sorry. I'm not connecting. What are you talking about: * Bare ENIG pads * ENIG pads that have SMT and other components solder connected to the pads So, you've got this ENIG board in an enclosure that takes-on water ... What is getting corroded? Talk
Electronics Forum | Thu Sep 08 13:07:18 EDT 2016 | claudea2
Hello Bob, we changed the nozzle z parameter until we got limit errors and backed up 1 mil. There was a slight reduction in the limit errors on the pickup of the component but it is still a problem. With the mod code we adjust the soft z height to ab
Electronics Forum | Thu Sep 08 15:45:21 EDT 2016 | claudea2
Thanks Bob, I will change the z-rod just to make sure. It is a tall part read at 180. The nozzle height bugs me because we have 3 machines and the first one has a nozzle height of 238 while the 2 others around 200. I am thinking this parameter may ad
Electronics Forum | Thu Aug 25 16:39:40 EDT 2016 | jserpas
Hello, I am curious if anyone knows of an easier way to straighten Fuji feeder baskets for CP6 machines. Are there maybe any specific jigs out there that would help with this? Has anyone ever ran into having baskets tweaked on these feeders and found
Electronics Forum | Mon Aug 29 00:10:08 EDT 2016 | abhilash4788
Hi all, Currently one of our customer has ask to build server units, around 500 units in a week(mechanical assy & testing), the data we have is BOM... bay consists of 10 units. Need help on Industrial engg point of view on handling and assembling the
Electronics Forum | Wed Aug 31 17:23:00 EDT 2016 | corepride
Hi everyone, I have a problem with the 630 VME vision system: during startup machine, an error popup appears saying "Did not receive request to load machine model within timeout period. Possible machine error condition exists. Do you want to continu