Electronics Forum | Fri Apr 14 19:32:26 EDT 2023 | jdengler
You must leave space around the boards in a batch cleaner or else you will not get them clean enough. About half of what you think you can put in is all that you will end up running. Very hard to get any real through put. Drying times are high also
Electronics Forum | Fri Apr 21 14:22:45 EDT 2023 | padawanlinuxero
Do all of the above (robgd3) In my case the problem was a motor inside the moving head started to give up so it kinda miss the synchro with the other motor on the outside, and in my case we bought the new motor but it took several day to fix with the
Electronics Forum | Fri Apr 21 22:13:14 EDT 2023 | jamesatqkits
It is pretty high, I will have to try it with no exhaust, thanks for the idea. Have a great weekend. I should also mention someone that knows metal alloys told me that that much extra Nickle can cause the melt point to go up. Does anyone run hotter t
Electronics Forum | Sat Apr 22 19:40:32 EDT 2023 | smtusa
"I also believe some of the on-machine tools are unmatched in the industry...manually placing parts, reviewing the boards with the downward looking camera, learning new packages, etc." What do you mean by manually placing parts and reviewing boards
Electronics Forum | Sun Apr 23 11:22:37 EDT 2023 | kirill
Well, title. There are couple different FAI machines, but from what I've seen, there is some application that floating around the internet that allows you to scan the assembled board before reflow on AIO machine for JPG file, and then run in into FAI
Electronics Forum | Tue Apr 25 20:39:36 EDT 2023 | ttheis
We have a Yestech B3 AOI and it has been working pretty well for years but its flaky some times when the programs get larger/complex. We are considering a newer machine but we're small and need to buy used. We're looking at a BX model. Does anyone ha
Electronics Forum | Wed Apr 26 19:10:43 EDT 2023 | cyber_wolf
This machines support table looks similar to AP and UP machines. I believe MPM published the dimensions of the "H" tower that the dedicated plates bolts to. As far as the plate, they are typically (2) pieces with the inside hollowed out to allow for
Electronics Forum | Fri Apr 28 21:47:41 EDT 2023 | dwl
It's been a long time, but if I remember correctly, the BX has higher resolution cameras. The software is the same so the learning curve will be minimal, but due to the higher res cameras, you won't be able to move programs from the B3 to the BX. If
Electronics Forum | Sat Apr 29 02:14:24 EDT 2023 | ttheis
Yeah we had an issue with the b3 dongle which we were fortunately able to fix by replacing the usb connector on the dongle. The price they quoted for the dongle was absurd. Thanks for the info. The software on the b3 is really flaky and it crashes a
Electronics Forum | Sat Apr 29 12:18:07 EDT 2023 | poly
I have finally got a calibration kit for my single beam multi function Genesis. Calibration finishes successfully, I then attempt to pick a part with the 7 spindle head and it gives me a collision error. The error occurs even when I don't have a no
