Electronics Forum | Wed Apr 13 08:01:32 EDT 2005 | Bryan
Can you please decrease the ramp rate of your reflow profile?In my opion,if you heat the pin too fast,the solder will drop for the gravity and the cappilary force can't draw it back.On the row with much heatsink,this issue won't happen,that's the rea
Electronics Forum | Wed Apr 13 17:20:31 EDT 2005 | Shean Dalton
Hi Dirty Boards, Austin American Technology offers both cleaning equipment and contract cleaning services. We would be happy to speak with you about your cleaning application. Please contact us at 512-335-6400 or you can reach us at contactus@aat-
Electronics Forum | Thu Apr 21 00:09:12 EDT 2005 | Debbie Technical Devices
Any help locating a machine to remove foreign > materials from bare pcb's would be appreciated, There are several issues that should be addressed. There are several issues that should be addressed. Let's talk about your process and find out what
Electronics Forum | Fri Apr 08 07:55:14 EDT 2005 | CN
Sounds like it would by tough to justify, thought of oursourcing? if the volume is really that low I bet it would be cheaper to find an outside source to build them for you. As far as hand placment accuracy If you are hand placing BGA's or even worse
Electronics Forum | Mon Apr 11 05:44:27 EDT 2005 | Rob
You'll struggle to find low end machines that accurately and reliably place 0201's (despite some of the manufacturers claims). You'll also obviously need to place the larger components on the same platform, accurately which will really cost you.
Electronics Forum | Mon Apr 11 08:47:34 EDT 2005 | Rob
There's not many ways of doing it on the cheap except... Buy a second hand universal GSM1 with VME 630 vision, 0.5 mil per pixel camera & some expensive ceramic nozzles for the 0201's. This will be quite slow & the software quite awkward but lookin
Electronics Forum | Tue Apr 12 03:30:01 EDT 2005 | ianlg
Hi In regards to the screen printer you might like to check our Reprints R29-V semi automatic. For low to medium volume it would be perfect for your needs and being a 29" machine and able to print down to 01005 pads with ease. It has a digital zoom
Electronics Forum | Tue Apr 12 03:30:06 EDT 2005 | ianlg
Hi In regards to the screen printer you might like to check our Reprints R29-V semi automatic. For low to medium volume it would be perfect for your needs and being a 29" machine and able to print down to 01005 pads with ease. It has a digital zoom
Electronics Forum | Fri Apr 08 05:22:47 EDT 2005 | Bored
The light events are: Red - Alarm - Indicates that an alarm exists.This also occurs when the emergency power stop button has been used to stop the belt and turn off heater power. Orange - Alert - Indicates that an alert condition exists. Green - R
Electronics Forum | Thu Apr 07 14:07:11 EDT 2005 | Tater
Both methods are fine, but you should create or use a spec that fits your process needs. You should also consider if this warp will directly impact the performance of your final product once it's completely built. Then make sure your customer won't