Electronics Forum | Wed Jan 19 20:54:36 EST 2022 | emeto
Hello experts, We have hard time with a tantalum capacitor challenging our 12mm feeder. Pocket seems to small for the part and parts are getting stuck and cannot be picked. In my opinion this part should use 16mm on 12mm pitch rather than 12mm tape
Electronics Forum | Thu Jan 20 08:26:22 EST 2022 | oclsc
Hej SMTnet. I have some questions regarding when to replace nozzles at the H12HS and DX mounting heads (Fuji Aimex 2, running Nexim). 1. Is there anyone here at this forum who has any experince how often it make sense to replace the nozzles in orde
Electronics Forum | Fri Jan 28 12:34:13 EST 2022 | jseewald
Generally, a well-designed assembly should not require man-handling of the PCB to the point where it is deflecting like this. Is the housing too small? What kind of clearance do you have and is there anything you can do to alleviate the issue (clos
Electronics Forum | Thu Jan 27 19:01:11 EST 2022 | Claude_Couture
We have to make several different kits containing 5,7 or 17 resistors (axial leads). These resistors are supplied in ammo boxes or reel. We used to cut the tape by hand with scissors, but we need to cut 10000's of these per week. Has anyone ever seen
Electronics Forum | Thu Jan 27 20:01:59 EST 2022 | llawrence
Hi, I have a component that comes on 16mm tape and I am using it in a CL series feeder. The pitch of the tape is 12mm, but there are only settings for 4 and 8mm on the feeder. Is there a such thing as a 16mm CL feeder that can do 12mm pitch? If ther
Electronics Forum | Tue Feb 01 16:56:46 EST 2022 | rstellema
Hello all, I have a couple of old FUJI CP-6 SMT placement machines that are operating with very old PCMCIA Flash Memory cards. I would like to insure that I have back-ups should the memory cards fail. I assume that I would need a support USB reader/w
Electronics Forum | Tue Feb 01 19:02:48 EST 2022 | proceng1
USC PArk is your underside stencil cleaner. The camera pushes it back and a magnet grabs it and holds it back. Ours did this many years ago. I pulled the rear cover and initialized the machine, when the camera pushes the stencil back, grab it and
Electronics Forum | Wed Feb 02 23:28:48 EST 2022 | cbeneat
Something we've run into in the past, not on those machines, a different brand completely, and I have no experience with yours. We were having what you described and what we found was during the part being scanned, there was a bolt that held the shro
Electronics Forum | Fri Feb 04 14:15:10 EST 2022 | emeto
If the part makes it in the right location by leads touching the paste in the right location, you have very few places to check. 1. Check parameters like air kiss, or some timings you can keep the part down in placement position for a while. Sometim
Electronics Forum | Thu Feb 10 11:59:31 EST 2022 | russellreid
Hello everyone. How are you? Hopefully, you are all well. This s my first post in this forum and I don't know this is the right place or not to post this. But I hope I will get a better suggestion from you. I am posting this topic for your need. I a