Electronics Forum: chain (Page 1 of 40)

wave finger chain

Electronics Forum | Mon Jul 12 17:52:18 EDT 2010 | warwolf

Hello Our company has just bought a EWS 500 F XL wave machine (about 8 months ago) and i have been trained on how to use it so in new to the industry, things are going well so far but im a bit stumbled on the simplest thing and that’s weather or not

wave finger chain

Electronics Forum | Tue Jul 13 08:17:54 EDT 2010 | davef

We expect to find recommendations on periodic maintenance from the equipment fabricator in the operating manual. Those recommendations should be the basis for you to setup your maintenance program.

Oven pin chain lube ?

Electronics Forum | Tue Aug 11 16:18:41 EDT 2009 | dyoungquist

Oberon (oberonlube.com) makes a high temperature chain lube (oil). When our Heller oven was installed, we were told to use this as the replacement when our original volume of chain oil ran out. I do not know the price for it.

Heller MK3 edge chain maintenance

Electronics Forum | Thu Feb 13 08:08:41 EST 2014 | cyber_wolf

The manual says to bake the edge chains at 400C to clean them. Is anybody doing this ? I need to take my edge chains to a heat treat facility to clean them ? I don't want to spray oven cleaner on them as they appear to be plated with nickel or so

Heller MK3 edge chain maintenance

Electronics Forum | Fri Feb 14 14:09:06 EST 2014 | marcpeo

In general the chains don't need to be heated to 400 deg C for cleaning. In other words, most of the fluxes and constituents in the paste don't collect on the chain and gum it up. Bottom line: the heat treatment is not needed for 95% of the users.

Heller 1707EXL chain oil jar

Electronics Forum | Tue Mar 22 13:17:57 EDT 2011 | oangulo

I need to know the Heller 1707EXL chain oil jar part number and the oil part number. And where I can order them.

Heller 1707EXL chain oil jar

Electronics Forum | Thu Mar 24 07:58:07 EDT 2011 | wrongway

Hello all the heller chain oil p/n is 680784 im not for sure what the p/n is for the jar but mine have always leaked a little good luck

Heller MK3 edge chain maintenance

Electronics Forum | Sat Feb 15 10:31:53 EST 2014 | marcpeo

Sorry to say that most top out at 350 deg. Best to have it done outside. Is the chain locking up or not moving smoothly? If no signs of sticking then maybe no need to heat at all.

Heller 1707EXL chain oil jar

Electronics Forum | Tue Mar 22 14:05:33 EDT 2011 | glenseely

Have you tried to contact Heller?

Heller MK3 edge chain maintenance

Electronics Forum | Sat Feb 15 10:25:50 EST 2014 | jdengler

Can the oven do 400C? If so do them in the oven. Jerry

  1 2 3 4 5 6 7 8 9 10 Next

chain searches for Companies, Equipment, Machines, Suppliers & Information