Electronics Forum | Wed Jan 18 17:35:08 EST 2006 | gregoryyork
We manufacture solder and dont charge, so agree with the others and change elsewhere just make sure you are changing to better material if unsure stick with what you have and pay for it under duress. Cheers Greg York BLT Circuit Services Ltd England
Electronics Forum | Wed May 10 12:22:45 EDT 2006 | reg
Hi everyone, I am trying to evaluate the cost of buying new equipment. One of the concerns is blade holders, stencil frames and board vacuum tooling. How difficult is to change from Dek to MPM or viceversa without changing all our tooling.
Electronics Forum | Thu Jul 06 12:26:55 EDT 2006 | Chunks
Sounds like your flux to me. Since you cannot change the board or the machine, changing flux would be one question mark you could take away with a phone call and a sample. You will really be surprised how different fluxes can affect your final prod
Electronics Forum | Mon Sep 11 17:06:53 EDT 2006 | slthomas
1. Change the part. OR 2. Change the pads to Panasonic's recommendation. Actually both are recommended from my perspective. ECHU. Shudder.
Electronics Forum | Wed Dec 20 17:03:50 EST 2006 | aj
By the way , changing the ball screw will also sort your problem out because you will have to carry out the Z-axis setup ( belt tension etc ) as part of the change. so it is worth a shot to carry out the setup and see how it goes! you will have nothi
Electronics Forum | Mon Jan 22 08:02:34 EST 2007 | realchunks
Wow, that must be a lot of HASL to reflow and block a thru-hole. Sounds like your board house changed their process. Contact your board house about this. Change your incoming spec to look for this a well.
Electronics Forum | Mon Jul 30 10:17:26 EDT 2007 | davef
immersion ...easily changes color.. See that's the GREAT thing about immersion coatings. If they change color, they probably will not solder well. Try that with other coatings.
Electronics Forum | Mon Aug 27 15:13:48 EDT 2007 | davef
Rob When the little light goes red, your supplier changes your ion beds. How does he determine when to change the carbon bed? Carbon certainly won't go bad as fast as the ion beds. Right?
Electronics Forum | Tue Oct 02 20:26:18 EDT 2007 | marcelll
Thanks for the help guys. I found that serial port 2 was bad on the computer. Not able to change it to com 1 in the config. Seems to be protected by a factory password. So I had to change the computer and reload the software. It's working now. Thank
Electronics Forum | Wed Oct 31 10:30:30 EDT 2007 | wayne123
I only ever change board when the board layout is changed. I too have boards that are, well, not so pretty. but they work for profiles. Wayne
