Electronics Forum | Wed Jun 05 15:15:37 EDT 2019 | cristian_amlima
Hi Guys.. greetings! I hope someone could help me. Does anyone knows how to configure a gripper nozzle to juki 700 series? (more specifically FS730). With this nozzle the machine should blow to inflate the nozzle and I don't know how to change from
Electronics Forum | Mon Jun 10 10:12:42 EDT 2019 | assuredtech
What is the year, make and model of your oven? Are you running it with Upstream and Downstream (pre-reflow, post-reflow) conveyors? Is the qty of the product low, medium or high? What is the max process width of the oven? what is the max board with o
Electronics Forum | Thu Jun 13 12:50:00 EDT 2019 | don_julio
> A couple of caveats; The FR4 will degrade with > successive reflows and will eventually need to be > replaced. Not a big deal for low volume, but > something to be aware of. The bigger concern is > that a sheet of .125" lar
Electronics Forum | Wed Jun 19 10:11:59 EDT 2019 | jamesn
Hi to everyone I hope someone can help me with a problem I have on a Quad QSP-2. when calibrating ( Or trying to use ) Feeder Bases 2 and 4 on gantry 2 Im getting small amounts of accumulative drift in the X axis. I have changed the servo amplifier
Electronics Forum | Sun Jul 14 04:39:35 EDT 2019 | alexeyzb
I have changed job and now i have some problems. Previous experience was with high volume production and not so high quality level (class 1, 2 according IPC). Now i need to produce very high quality (and very expensive) PCBAs in Low volume production
Electronics Forum | Thu Jul 25 14:18:34 EDT 2019 | babe7362000
It's been awhile but I was wondering if anyone knows how to read the LED's on the Tep board to what they mean. Top 4 Red 1. blinking red 2. lit red 3. off 4. lit red 5. lit red 1. blinking green 2. not lit 3. lit green 4. off 5. off On the Gui
Electronics Forum | Wed Aug 07 06:26:33 EDT 2019 | spoiltforchoice
Look at what you make, what kind of questions come back to the office from the factory floor when documentation is poor or non-existent. Template your documentation accordingly, there should be enough in there that staff don't need to ask questions,
Electronics Forum | Fri Oct 11 03:06:00 EDT 2019 | bukas
Hello Dekhead, it is a constant offset, like 0.5 mm to right when machine prints away from operator. When print goes towards the operator there is no offset. I swapped X5 and X6 cards with spares I got but still same result . I set the program to hav
Electronics Forum | Mon Nov 11 20:26:37 EST 2019 | kylehunter
Alrighty... Problem solved - ended up not being a problem at all. So, what I didn't realize, was that the knead pressure was 5kg, and the first print was always kneaded, so that's why the set pressure showed 5kg. After it was done kneading, the set
Electronics Forum | Fri Nov 15 11:03:48 EST 2019 | rgduval
I think Steve is on to it. The wire is not getting hot enough to wet. Either the solderer is attempting to solder too quickly, or the PTH is connected to a ground plane. The solder sticking up through the hole leads me to think it's connected to a