Electronics Forum: changed (Page 1 of 512)

Silkscreen color changed

Electronics Forum | Fri Sep 14 17:22:54 EDT 2007 | golff

I have a changed on the white silkscreen to pink or purple. Do anyone come across with these problem before?

Silkscreen color changed

Electronics Forum | Fri Sep 21 16:31:07 EDT 2007 | adlsmt

P.S., Im the Cmiller in the old thread.

Silkscreen color changed

Electronics Forum | Fri Sep 14 17:50:54 EDT 2007 | ratsalad

I remember reading about this in the forums before. Search for silkscreen in the forums, and you will find the thread I am thinking about. http://www.smtnet.com//forums/index.cfm?fuseaction=view_thread&CFApp=1&Thread_ID=10013&#Message40186

Silkscreen color changed

Electronics Forum | Fri Sep 21 16:28:11 EDT 2007 | Cmiller

Yea, I remember that. Our customer freaked out but it never caused any problems I am aware of and the boards still have not come back to us. If you are using imersion gold, I would be pretty sure this is the cause.

My email address has changed

Electronics Forum | Tue Nov 17 08:41:20 EST 1998 | Chrys

Hi folks, Sorry to waste space on the forum with this stupid little detail thing, but I figured it was the easiest way to get the message out to everyone. My email address got changed with our last corporate re-org. We are now Siemens Information

GSM Placement Offset

Electronics Forum | Wed Jun 24 15:36:58 EDT 2020 | aveazey

Do you know which menu this is under? We had tried changing the X,Y Location in the Camera configuration but the changes didn't seem to actually change anything. We would power cycle the machine every time after changing the config file. We also trie

Philips Topaz X change nozzle FNC

Electronics Forum | Fri Dec 15 11:01:14 EST 2017 | robertorocco

I have one Topaz X FNC machine with this problem. The head 2 FNC not change the nozzle. The head 4-6-8 is ok and change, but head 2 no, when he tries to change the nozzle he gives me an error message. What could be the problem?

CP45 Conveyor direction

Electronics Forum | Tue Jun 11 13:25:22 EDT 2019 | romford_navy

Anyone know how to change direction of placement conveyor on CP45FVNEO? Changed direction in factory mode but no change? Input & Output ok Changed on conveyor pack board

Problem with shielding component

Electronics Forum | Tue Jan 09 13:01:17 EST 2007 | stepheniii

Not unless it's a case of "the only difference is..." What I mean by that is more than once I've been told the only difference in a new rev is one component or one change. But the truth was that was the only reason for the change, and in fact there

OT: Wavesolder Process Engineer Needed

Electronics Forum | Mon Jul 14 15:44:19 EDT 2008 | stepheniii

when you change one of previous mentioned > parameters. Contact length with the board should > never change when the conveyer speed is changed, > only contact time should change. If I understand correctly then if you change nothing else, dwell t

  1 2 3 4 5 6 7 8 9 10 Next

changed searches for Companies, Equipment, Machines, Suppliers & Information

Best SMT Reflow Oven

High Resolution Fast Speed Industrial Cameras.
One stop service for all SMT and PCB needs

We offer SMT Nozzles, feeders and spare parts globally. Find out more
MSD Dry Cabinets

High Throughput Reflow Oven
Electronics Equipment Consignment

High Speed Precision In-Line SPI System - Mirtec MS-11