Industry Directory | Consultant / Service Provider / Manufacturer
Since 1986, our focus on delivering quality PCB's and Assemblies hasn't changed. Our top priority has always been to understand what the customer values, evaluate their needs and deliver the best-in-class service and products.
Volumetric Dispense Pump - PCD Technology revolutionizes how you dispense and how you perceive dispensing. PCD - Progressive Cavity Displacement PCD is a continuously volumetric dispense pump based on the Progressive Cavity principle. PCD technolog
New Advanced Precision Auger Pump - Single Pump Solution The Precision Auger pump is designed to work with mid-to-high viscosity liquid such as glues, conductive, and non-conductive adhesive and pastes. The pump is controlled with a servo motor equ
Electronics Forum | Thu Nov 11 11:11:18 EST 2004 | clampron
D.B., You are justified in your concern over the last requirement. I have been imposed by a customer with the same hand solder/rework requirements. It seems the biggest concern is thermally shocking ceramic chips. You are much less likely to do this
Electronics Forum | Thu Nov 11 11:48:57 EST 2004 | rlackey
Adding flux prior to reflow was not an uncommon process on certain packages - a couple of our Universal GSM'S have flux heads for this reason (Not that we've ever used it on anything). What is the component they are suggesting using additional flu
Used SMT Equipment | SMT Equipment
Siemens SIPLACE 80 S25 SMT Pick & Place *** Refurbished by Siemens in 2007 *** Machine Dimensions: 64" x 110" x 68" (excluding light tower) Note: No Feeders or Feeder Carts are included in this lot. Serial: 666-12006556 Features: S/W Ve
Used SMT Equipment | SMT Equipment
1996 Siemens SIPLACE 80 F3 SMT Pick & Place [includes Wafflepack Changer] Power: 110/ 208 VAC; 9A; 50/60 Hz Machine Dimensions: 64" x 108" x 68" (excluding light tower) Note: No Feeders or Feeder Tables are included in this lo
Industry News | 2013-05-21 22:12:09.0
Based on its recent analysis of the surface mount technology (SMT) reflow soldering equipment market, Frost & Sullivan recognizes Heller Industries, Inc. with the 2013 Global Frost & Sullivan Award for Market Share Leadership.
Industry News | 2019-12-09 14:44:26.0
The SMT Reflow Soldering Equipment (Global) award was awarded to Heller Industries by Frost & Sullivan.
Parts & Supplies | Pick and Place/Feeders
GFC-Y01 YAMAHA Feeder Storage Cart The feeder storage cart gives your operators a secure place to put unused feeders between set-ups minimizing failures due to improper storage or handling. When its time to change over to the next job, the cart is
Parts & Supplies | Pick and Place/Feeders
GFC-P01 PANASERT MSR Feeder Storage Cart The feeder storage cart gives your operators a secure place to put unused feeders between set-ups minimizing failures due to improper storage or handling. When its time to change over to the next job, the
Technical Library | 2021-02-20 00:55:47.0
Customers must be able to rely on accurate humidity indication as an assurance of SMD quality and fitness for processing and use. Without it, they might accept SMDs from suppliers that have already been irreparably damaged by moisture during storage or transit. Or, they might approve for processing SMDs that have been improperly or insufficiently heat-dried. Beyond the processing questions, there are financial questions: Where did the dry pack problems originate and who--supplier, customer, shipper--is financially responsible for the damaged SMDs? In response, Clariant, the originator of the color change humidity indicator card, and a member of the JEDEC's Subcommittee 14.1, "Reliability and Test Methods for Packaged Devices," created a new "non-reversible" halogen and cobalt dichloride free humidity indicator card. This HIC combines two reversible indicators (5% and 10%) with a new non-reversible (60% RH) indicator spot. (Figure 1) The 5% and 10% reversible spots work the way similar indicators do: they change color from blue (dry), to lavender, to pink (wet) to indicate humidity exposure at the indicated levels. If humidity levels drop, they will gradually revert back to blue.
Technical Library | 2019-06-17 15:09:43.0
Very often pick and place machines are programmed using CAD data. This data increases the accuracy, precision, and repeatability of its component placement objectives. CAD data makes fine pitch and small component assemblies repeatable, but cannot adjust to a particular board unless it is exactly the same size and shape of the original board used for programming. The process by which printed circuit boards (PCBs) are made only allows some minor changes inboard size and shape, but these small differences are enough for parts to be misplaced. For this reason we use fiducial marks to increase the chances of precise component alignment.
New Advanced Precision Auger Pump - Single Pump Solution The Precision Auger pump is designed to work with mid-to-high viscosity liquid such as glues, conductive, and non-conductive adhesive and pastes. The pump is controlled with a servo motor equ
Volumetric Dispense Pump - PCD Technology revolutionizes how you dispense and how you perceive dispensing. PCD - Progressive Cavity Displacement PCD is a continuously volumetric dispense pump based on the Progressive Cavity principle. PCD technolog
Training Courses | | | IPC/WHMA-A-620 Specialist (CIS) Recert.
The Certified IPC/WHMA-A-620 Specialist (CIS) recertification courses are intended for those individuals who were previously certified as IPC/WHMA-A-620 Specialist.
Training Courses | | | IPC-A-610 Specialist (CIS) Recert.
The Certified IPC-A-610 Specialist (CIS) recertification courses are intended for those individuals who were previously certified as IPC-A-610 Specialists.
Events Calendar | Tue Jun 23 00:00:00 EDT 2020 - Thu Jun 25 00:00:00 EDT 2020 | College Park, Maryland USA
Symposium on Counterfeit Parts and Materials
Events Calendar | Tue Sep 24 00:00:00 EDT 2019 - Tue Sep 24 00:00:00 EDT 2019 | ,
IPC Tech Ed Webinar Series - Electrostatic Discharge Control - Game Changing Threats - FREE Introduction Webinar
Career Center | Florham Park, New Jersey USA | Engineering
Field Service Engineer Job Description The basic function of this position: Installation, training, repair, and implementation of retrofits on the complete line of Heller reflow ovens. Candidate must be a US citizen. DUTIES AND RESPONSIBILITIES: S
Career Center | Rolling Meadows, Illinois USA | Quality Control
Job: PCB Assembly/Soldering Instructor Responsibilities: Provide instruction to students in IPC classes IPC-A-610, IPC JSTD-001, IPC 7711/21, IPC-A-620 Provide instruction to students in BEST classes Provide course content for and instruction to stu
Career Center | Chennai, India | Sales/Marketing
Experience in sales of inter-connect, passive, active, and electro-mechanical components Product Engineering Role as handling BOM, ECO, ECN in the New product introduction of Philips LCD TV and Kulicke and Soffa wire bonding m/c Process and Quali
Career Center | Mayaguez, Puerto Rico | Engineering,Production
Detail oriented and goes to great lengths to insure that the products are meeting and exceeding customer expectations. Place procedures and training in place to provide former company with techniques for ISO 9001:2008 and QS 9000. Assist design engi
| https://www.eptac.com/webinar/updates-on-industry-changes-in-ipc-standards-and-certification-training/
Updates on Industry Changes in IPC Standards and Certification Training | EPTAC Skip to content Scroll Toll Free: 800.643.7822 Toggle navigation Training All Classes
ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/en/divisions/asymtek/about-us/news/nordson-asymteks-qadence-closed-loop-flow-control-automatically-compensates-for-viscosity-changes
Nordson ASYMTEK’s Qadence™ Closed-loop Flow Control Automatically Compensates for Viscosity Changes during Conformal Coating ASYMTEK Products Corporate | Global Directory